Saturn, 10,000 frames, 2026-11-12

A place to share images that you have taken with SharpCap.
Forum rules
Please upload large images to photo sharing sites (flickr, etc) rather than trying to upload them as forum attachments.

Please share the equipment used and if possible camera settings to help others.
Post Reply
User avatar
turfpit
Posts: 2279
Joined: Mon Feb 13, 2017 8:13 pm
Location: UK
Contact:

Saturn, 10,000 frames, 2026-11-12

#1

Post by turfpit »

Saturn captured 12th Nov 2026, elevation 33°, used an Altair 183C to capture 10,000 frames in 7.5m @ 22fps. Poor conditions, only 23% stacked.

2026-11-12-2037_6-Saturn4_Stack2_F2323_SuperRes20_Sharpen_View_16b.png
2026-11-12-2037_6-Saturn4_Stack2_F2323_SuperRes20_Sharpen_View_16b.png (108.23 KiB) Viewed 270 times

Equipment: Celestron AVX mount, Celestron C8, JMI Motofocuser, Altair 183C, Masuyama 1.5X Barlow.
Software: SharpCap, BiggSky.
Capture: 10,000 frames in 7.5m @ 22fps. Centre used to hold ROI steady. gain 3000/5000, exposure adjusted so histogram at ~75% saturation.
Processing: Stack (23%)+ Denoise (100/100), Decon. Note: In Expert Settings, ChannelAlignMethod=2 was used.

Histogram.JPG
Histogram.JPG (32.17 KiB) Viewed 270 times

Important settings from Capture log

[ALTAIRH183C]
Output Format=SER file (*.ser)(Auto)
Capture Area=640x480
Colour Space=RAW8
Black Level=0
USB Speed=2
Analogue Gain=3000
Exposure=44.1770ms
White Bal (B)=0
White Bal (G)=0
White Bal (R)=0
Celestron Telescope Driver=RA=02:42:59.2,Dec=-42:04:00 (JNOW)
TimeStamp=2026-11-12T20:33:57.5444049Z
SharpCapVersion=4.1.14310.0
StartCapture=2026-11-12T20:33:57.5350150Z
MidCapture=2026-11-12T20:37:41.5266349Z
EndCapture=2026-11-12T20:41:25.5182548Z
JDStartCapture=2461357.356916
JDMidCapture=2461357.359508
JDEndCapture=2461357.362101
Duration=447.983s
FrameCount=10000
ActualFrameRate=22.3223fps
TimeZone=+0.00

It was 10 years ago this month that I spent 3 nights to get Saturn in view using a Nexstar 6SE and Celestron Solar System imager!

Dave
User avatar
admin
Site Admin
Posts: 17573
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Saturn, 10,000 frames, 2026-11-12

#2

Post by admin »

Hi Dave,

very nice - good detail for 8" aperture in poor conditions. Shows that the processing workflow is really doing a good job of finding the good frames :)

SharpCap all started from the struggle to do planetary imaging (in my case an SE8) - trying to get Jupiter into view at the same time as fighting camera settings, capture filenames, using a touchpad on a laptop while wearing gloves, etc.... :)

cheers,

Robin
User avatar
turfpit
Posts: 2279
Joined: Mon Feb 13, 2017 8:13 pm
Location: UK
Contact:

Re: Saturn, 10,000 frames, 2026-11-12

#3

Post by turfpit »

Thanks Robin.

The mathematical decision as to which frames to select for stacking is a good indicator of the seeing conditions.

Persistence is the key for this hobby.

Dave
timh
Posts: 689
Joined: Mon Aug 26, 2019 5:50 pm

Re: Saturn, 10,000 frames, 2026-11-12

#4

Post by timh »

Hi Dave, I'm getting pretty similar results to yours having also spent a fair time imaging Saturn under generally unsteady skies. The best images have been before it crosses the meridian -- part of the problem is probably that it passes quite low over a row of neighbours houses after that. But overall I don't think that there has been much in the way of good seeing. Biggsky has been doing a good job I think (having now read the manuals) and - for me - the best strategy has been 17 ms exposures at about 50 fps over 10 min ser files (big!) --then breaking that up into 6 x 100s stacks taking just the top 15% of each, deconvoluting the 6 stacks and then recombining into a single stack using the Biggsky 'winjupos- like' functionality.

One thing that I did notice is that - similar to me - you are also seeing edge artifacts -- although they are more pronounced in my case (set up is 300 mm F4, 2X Barlow with the ZWO ASI 715MC camera having the tiny 1.45 u pixels). It's a consistent effect -- there may be an element of over sharpening to it too? I am borrowing a different camera and Televue amplifier to try and work out whether (amongst other things) it is a limitation of my particular set up and/ or camera. Being fainter it may just be more of a challenge for software to stack Saturn accurately as compared to say Jupiter? Picture included for interest and comparison also showing Enceladus on the left and Tethys on the right (from about 20:21 on 13/11/26).
Attachments
2026-11-13-2021_3_Sat_RGB_Frames_1_DRC_Sharpen_16b_affinity_curves+moons.jpg
2026-11-13-2021_3_Sat_RGB_Frames_1_DRC_Sharpen_16b_affinity_curves+moons.jpg (64.16 KiB) Viewed 140 times
User avatar
turfpit
Posts: 2279
Joined: Mon Feb 13, 2017 8:13 pm
Location: UK
Contact:

Re: Saturn, 10,000 frames, 2026-11-12

#5

Post by turfpit »

Tim

Are you using
Expert Settings, ChannelAlignMethod=2

Dave
timh
Posts: 689
Joined: Mon Aug 26, 2019 5:50 pm

Re: Saturn, 10,000 frames, 2026-11-12

#6

Post by timh »

Dave, No I stuck with channel 0 because green was the strongest signal. I switched to red - channel 1- when I was using the red/ near IR filter.

I have been trying a few variations to see what might make a difference. Thus far -- taking only 15% rather than the ~ 25% that auto usually suggests during stacking, varying the ROI choice (including the rings or not) for deconvolution and varying the noise setting percentages (100,100 or 50,50) etc. Tightening down to 15% made for a small improvement

Tim
timh
Posts: 689
Joined: Mon Aug 26, 2019 5:50 pm

Re: Saturn, 10,000 frames, 2026-11-12

#7

Post by timh »

Just noted that with rind suppression set to 3 in Expert settings there were no edge effects in a far red/IR image so that may also work for LRGB visible images?
User avatar
turfpit
Posts: 2279
Joined: Mon Feb 13, 2017 8:13 pm
Location: UK
Contact:

Re: Saturn, 10,000 frames, 2026-11-12

#8

Post by turfpit »

There is no definitive answer to these settings. A case of trial & error coupled with experience to deal with the vary conditions and different combinations of equipment.
User avatar
turfpit
Posts: 2279
Joined: Mon Feb 13, 2017 8:13 pm
Location: UK
Contact:

Re: Saturn, 10,000 frames, 2026-11-12

#9

Post by turfpit »

Tim

I had another go at processing this data using the DeRindFactor you suggested. Here are the 10,000 frame capture results, with processing details following on.

Saturn_SuperRes_comparison.jpg
Saturn_SuperRes_comparison.jpg (46.11 KiB) Viewed 10 times

Processing steps:
BiggSky_settings.JPG
BiggSky_settings.JPG (77.7 KiB) Viewed 10 times

Still some slight red/blue separation. I now need to look at the merits of Process Luminance Only on the Decon tab. Still some learning to go to get the best out of this data.

I always keep in mind my effort from 10 years ago.
saturn.PNG
saturn.PNG (20.81 KiB) Viewed 10 times

Dave
Post Reply