Saturn captured 12th Nov 2026, elevation 33°, used an Altair 183C to capture 10,000 frames in 7.5m @ 22fps. Poor conditions, only 23% stacked.
Equipment: Celestron AVX mount, Celestron C8, JMI Motofocuser, Altair 183C, Masuyama 1.5X Barlow.
Software: SharpCap, BiggSky.
Capture: 10,000 frames in 7.5m @ 22fps. Centre used to hold ROI steady. gain 3000/5000, exposure adjusted so histogram at ~75% saturation.
Processing: Stack (23%)+ Denoise (100/100), Decon. Note: In Expert Settings, ChannelAlignMethod=2 was used.
Important settings from Capture log
[ALTAIRH183C]
Output Format=SER file (*.ser)(Auto)
Capture Area=640x480
Colour Space=RAW8
Black Level=0
USB Speed=2
Analogue Gain=3000
Exposure=44.1770ms
White Bal (B)=0
White Bal (G)=0
White Bal (R)=0
Celestron Telescope Driver=RA=02:42:59.2,Dec=-42:04:00 (JNOW)
TimeStamp=2026-11-12T20:33:57.5444049Z
SharpCapVersion=4.1.14310.0
StartCapture=2026-11-12T20:33:57.5350150Z
MidCapture=2026-11-12T20:37:41.5266349Z
EndCapture=2026-11-12T20:41:25.5182548Z
JDStartCapture=2461357.356916
JDMidCapture=2461357.359508
JDEndCapture=2461357.362101
Duration=447.983s
FrameCount=10000
ActualFrameRate=22.3223fps
TimeZone=+0.00
It was 10 years ago this month that I spent 3 nights to get Saturn in view using a Nexstar 6SE and Celestron Solar System imager!
Dave
Saturn, 10,000 frames, 2026-11-12
Forum rules
Please upload large images to photo sharing sites (flickr, etc) rather than trying to upload them as forum attachments.
Please share the equipment used and if possible camera settings to help others.
Please upload large images to photo sharing sites (flickr, etc) rather than trying to upload them as forum attachments.
Please share the equipment used and if possible camera settings to help others.
- admin
- Site Admin
- Posts: 17571
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Saturn, 10,000 frames, 2026-11-12
Hi Dave,
very nice - good detail for 8" aperture in poor conditions. Shows that the processing workflow is really doing a good job of finding the good frames
SharpCap all started from the struggle to do planetary imaging (in my case an SE8) - trying to get Jupiter into view at the same time as fighting camera settings, capture filenames, using a touchpad on a laptop while wearing gloves, etc....
cheers,
Robin
very nice - good detail for 8" aperture in poor conditions. Shows that the processing workflow is really doing a good job of finding the good frames
SharpCap all started from the struggle to do planetary imaging (in my case an SE8) - trying to get Jupiter into view at the same time as fighting camera settings, capture filenames, using a touchpad on a laptop while wearing gloves, etc....
cheers,
Robin
Re: Saturn, 10,000 frames, 2026-11-12
Thanks Robin.
The mathematical decision as to which frames to select for stacking is a good indicator of the seeing conditions.
Persistence is the key for this hobby.
Dave
The mathematical decision as to which frames to select for stacking is a good indicator of the seeing conditions.
Persistence is the key for this hobby.
Dave
Re: Saturn, 10,000 frames, 2026-11-12
Hi Dave, I'm getting pretty similar results to yours having also spent a fair time imaging Saturn under generally unsteady skies. The best images have been before it crosses the meridian -- part of the problem is probably that it passes quite low over a row of neighbours houses after that. But overall I don't think that there has been much in the way of good seeing. Biggsky has been doing a good job I think (having now read the manuals) and - for me - the best strategy has been 17 ms exposures at about 50 fps over 10 min ser files (big!) --then breaking that up into 6 x 100s stacks taking just the top 15% of each, deconvoluting the 6 stacks and then recombining into a single stack using the Biggsky 'winjupos- like' functionality.
One thing that I did notice is that - similar to me - you are also seeing edge artifacts -- although they are more pronounced in my case (set up is 300 mm F4, 2X Barlow with the ZWO ASI 715MC camera having the tiny 1.45 u pixels). It's a consistent effect -- there may be an element of over sharpening to it too? I am borrowing a different camera and Televue amplifier to try and work out whether (amongst other things) it is a limitation of my particular set up and/ or camera. Being fainter it may just be more of a challenge for software to stack Saturn accurately as compared to say Jupiter? Picture included for interest and comparison also showing Enceladus on the left and Tethys on the right (from about 20:21 on 13/11/26).
One thing that I did notice is that - similar to me - you are also seeing edge artifacts -- although they are more pronounced in my case (set up is 300 mm F4, 2X Barlow with the ZWO ASI 715MC camera having the tiny 1.45 u pixels). It's a consistent effect -- there may be an element of over sharpening to it too? I am borrowing a different camera and Televue amplifier to try and work out whether (amongst other things) it is a limitation of my particular set up and/ or camera. Being fainter it may just be more of a challenge for software to stack Saturn accurately as compared to say Jupiter? Picture included for interest and comparison also showing Enceladus on the left and Tethys on the right (from about 20:21 on 13/11/26).
- Attachments
-
- 2026-11-13-2021_3_Sat_RGB_Frames_1_DRC_Sharpen_16b_affinity_curves+moons.jpg (64.16 KiB) Viewed 13 times
Re: Saturn, 10,000 frames, 2026-11-12
Tim
Are you using
Expert Settings, ChannelAlignMethod=2
Dave
Are you using
Expert Settings, ChannelAlignMethod=2
Dave