Frames in memory after record with ASI174MM

[Andreas83]

Hello all!

I have the following problem: When I want to record a sequence, it sometimes takes a while until the images are transferred from memory. Can someone help me with the log file?
Maybe my storage settings in SharpCap are wrong?
The problem exists with the internal hard drive (SSD) and with the external one (USB3).
Camera is also connected via 2m USB3 cable.
All drivers are up to date.

I already tried the tips here from the forum: change USB high speed on off, TurboUSB 80%, 100%, 40%...








Many thanks

Andreas

[admin]

Hi,

just in case anyone else comes along with the same issue, I will link to my reply to your similar post here :viewtopic.php?p=43932#p43932

From the log, it does look very much like the disk/SSD is failing to keep up with the data write speed after the first few captures. The first ones may be working fine because Windows is caching writes to the disk, or because the disk slows down after some amount of data is written...

The trick is to make lots of space on the disk, optimise it, then try some test captures - if the first few are fine after the cleanup/optimise but then the problem appears then it is very likely the disk slowing down once the single bit per cell 'fast area' of the SSD is filled.

cheers,

Robin