Page 1 of 1

Auto adjust gain/exp for flats

Posted: Sat Feb 14, 2026 10:29 pm
by Howardk
Hi

I can’t get the auto adjust gain/exposure to actually do anything when capturing flats

I have the smart histogram working

Is this function functional??

Re: Auto adjust gain/exp for flats

Posted: Mon Feb 16, 2026 2:32 pm
by admin
Hi,

if you press the button then you should see an extra window pop up which will record all the things the autoexposure is doing (measurements, adjustments, things like that). If it works (or if the exposure was OK to begin with and it didn't need to do anything) then that window will just vanish again. If something bad happens then you should get a message box pop up with some sort of description of the error.

In either case, the SharpCap log will also contain all the stuff that appeared in that extra window, so you can go back and review it if it vanishes before you can read it. Or you can post the relevant log entries here and I will do my best to check them out.

So, for instance, if I try to run the autoexpos with a webcam it will give me an error (on my specific webcam) because there is no gain adjustment. On some other cameras (mostly QHY) you may get an error that the gain control is uncalibrated - this is SharpCap saying that it doesn't know how adjusting the gain is going to affect the image brightness...

cheers,

Robin

Re: Auto adjust gain/exp for flats

Posted: Fri Feb 20, 2026 12:10 am
by Howardk
Thanks

I will give it a try next time