Auto adjust gain/exp for flats

Anything that doesn't fit into any of the other forums
Post Reply
Howardk
Posts: 139
Joined: Tue Feb 18, 2025 12:40 am
Location: UK

Auto adjust gain/exp for flats

#1

Post by Howardk »

Hi

I can’t get the auto adjust gain/exposure to actually do anything when capturing flats

I have the smart histogram working

Is this function functional??
User avatar
admin
Site Admin
Posts: 17573
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Auto adjust gain/exp for flats

#2

Post by admin »

Hi,

if you press the button then you should see an extra window pop up which will record all the things the autoexposure is doing (measurements, adjustments, things like that). If it works (or if the exposure was OK to begin with and it didn't need to do anything) then that window will just vanish again. If something bad happens then you should get a message box pop up with some sort of description of the error.

In either case, the SharpCap log will also contain all the stuff that appeared in that extra window, so you can go back and review it if it vanishes before you can read it. Or you can post the relevant log entries here and I will do my best to check them out.

So, for instance, if I try to run the autoexpos with a webcam it will give me an error (on my specific webcam) because there is no gain adjustment. On some other cameras (mostly QHY) you may get an error that the gain control is uncalibrated - this is SharpCap saying that it doesn't know how adjusting the gain is going to affect the image brightness...

cheers,

Robin
Howardk
Posts: 139
Joined: Tue Feb 18, 2025 12:40 am
Location: UK

Re: Auto adjust gain/exp for flats

#3

Post by Howardk »

Thanks

I will give it a try next time
Post Reply