How can I configure timelapse settings to extend the resulting GIF animation?
I've collected up to 15 and 20 minutes of video but the amount of rotation is very slight and the GIF is 4MB. I imagine I need to take a longer video to see more movement but the amount of data collected in the SER file becomes HUGE after 15 minutes and the resulting GIF is 5MB; yet showing an imperceivable rotation; which is understandable since Jupiter's rotation is very little in 15 minutes time.
Can anyone offer improved settings to allow longer recording times without creating HUGE files?
Thank you.
Mike
Time Lapse Forward-Reverse Question
Forum rules
One tutorial per topic please.
Please only post content that you have created in this form.
Tutorials should be either in PDF format as an attachment or written in the first post of the topic. Links to video tutorials you created are also acceptable.
One tutorial per topic please.
Please only post content that you have created in this form.
Tutorials should be either in PDF format as an attachment or written in the first post of the topic. Links to video tutorials you created are also acceptable.
-
admin
- Site Admin
- Posts: 17363
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Time Lapse Forward-Reverse Question
Hi Mike,
the GIF creation takes between 120 and 150 frames from the full timelapse SER file (evenly spaced out) and makes the GIF from those. If you let the timelapse run for only 15 or 20 minutes then you won't get much rotation at all, but let it run an hour or so and you will see enough to be noticeable. If you are worried about the size of the main timelapse SER file, turn down the frequency with which images are saved to the timelapse to maybe every 10-15 seconds or so. At 10 second intervals the main timelapse will get 360 frames per hour.
cheers,
Robin
the GIF creation takes between 120 and 150 frames from the full timelapse SER file (evenly spaced out) and makes the GIF from those. If you let the timelapse run for only 15 or 20 minutes then you won't get much rotation at all, but let it run an hour or so and you will see enough to be noticeable. If you are worried about the size of the main timelapse SER file, turn down the frequency with which images are saved to the timelapse to maybe every 10-15 seconds or so. At 10 second intervals the main timelapse will get 360 frames per hour.
cheers,
Robin