SC and Meade Generic driver not talking

Anything that doesn't fit into any of the other forums
Post Reply
geoscoping
Posts: 28
Joined: Sat Mar 22, 2025 3:03 pm

SC and Meade Generic driver not talking

#1

Post by geoscoping »

Hello,

I have a LX200GPS 12" telescope. I am running the 4.2G firmware on the handset and using the Meade Generic ASCOM driver to connect my scope to everything else on my computer. I use NINA, PHD2 and autostar on my computer ( not all at the same time) and everything works perfectly with my scope but SC is not finding it. I have also tried the POTH hub driver and thats not working either. I'll attached my log file here.
Attachments
Log1.txt
log
(75.44 KiB) Downloaded 201 times
geoscoping
Posts: 28
Joined: Sat Mar 22, 2025 3:03 pm

Re: SC and Meade Generic driver not talking

#2

Post by geoscoping »

update:

I downloaded the newest version of SC and now it doesnt even seem like its trying to find it.
Attachments
Log_2025-06-03T22_32_19-8256.log
log2
(23.96 KiB) Downloaded 198 times
User avatar
admin
Site Admin
Posts: 17584
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: SC and Meade Generic driver not talking

#3

Post by admin »

Hi,

there doesn't seem to be anything bad happening in either log. One of them shows errors from asking the ASCOM driver for the 'Description' of the mount, but that is normal (some can report Description info without connecting, others can't - SharpCap records the problem but can deal with either).

What I'm not seeing in either log is you opening a camera and then using the 'Connected' checkbox next to the mount control area on the right to get SharpCap to connect to the mount. Maybe you have been trying that and it's just not in the logs you have sent, or maybe you weren't expecting to have to do that. You can see a sample of the 'Connected' checkbox that you need to tick to establish communication in the documentation here : https://docs.sharpcap.co.uk/4.1/#GOTO%20Mount%20Control

Hope this helps,

Robin
geoscoping
Posts: 28
Joined: Sat Mar 22, 2025 3:03 pm

Re: SC and Meade Generic driver not talking

#4

Post by geoscoping »

thank you so much for your time! I just got home and got everything all setup. I figured out what was happening... I wasn't selecting a camera to start everything up. I didn't know you needed to select and connect to a camera in order to have it connect to the mount. I was using ChatGPT and it was saying that an option in the tool menu would show up saying "connect to mount" once SC saw it was able to.
User avatar
admin
Site Admin
Posts: 17584
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: SC and Meade Generic driver not talking

#5

Post by admin »

Hi,

glad you got it working!

ChatGPT is great when it works, but it does tend to make up rubbish from time to time (actually a fairly high percentage of the time!)

cheers,

Robin
Post Reply