Hi all, I am using SharpCap Pro (V4.0.8718) 64bit, is there a way to get it to change to MONO16 as when you tern it off when you tern it on again it is back to MONO8 as i need it in MONO16 TO DO SUN.
peter
MONO8 TO MONO16
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
MONO8 TO MONO16
LUNT LS 60THa WITH PRESSURE TUNER, BLOCKING FILTER B1200, Skywatcher Startravel 80T OTA, ZWO ASI 178MM, lot of bit
-
admin
- Site Admin
- Posts: 17504
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: MONO8 TO MONO16
Hi,
you can either use the option to save and restore all camera settings when the camera is reopened - see 'Automatically restore camera settings' here : https://docs.sharpcap.co.uk/4.0/#General%20Tab
or... you can use capture profiles, create one with the settings you want (name it 'Solar' perhaps), then save it and set it as the default profile for that camera - see https://docs.sharpcap.co.uk/4.0/#Capture%20Profiles
cheers,
Robin
you can either use the option to save and restore all camera settings when the camera is reopened - see 'Automatically restore camera settings' here : https://docs.sharpcap.co.uk/4.0/#General%20Tab
or... you can use capture profiles, create one with the settings you want (name it 'Solar' perhaps), then save it and set it as the default profile for that camera - see https://docs.sharpcap.co.uk/4.0/#Capture%20Profiles
cheers,
Robin