Hello, I have c mount lens the 2/3" MC3-03X macro Zero distortion multi-configuration macro lens.
Lens was not cheap at ~700Eur.
http://www.opto-engineering.com/product ... distortion
Now I would like to get the 18MP 1/2.3" camera.
https://en.ids-imaging.com/store/produc ... rev-2.html
Lens manufacturer sent me these charts for my lens, it seems the lens is more like 10MP at 180lp/mm sice FUJINON 12MP is 200lp/mm
The problem is that Pointgrey states that you need 323 lp/mm for 1/2.3" sensor ! No such lenses exit as far as I searched.
------------------
How bad will the image be on 1 vs. 2?
1.https://en.ids-imaging.com/store/produc ... rev-2.html
compared to say
2.https://www.baslerweb.com/en/products/c ... 4024-29uc/
I refuse to believe I can use 5MP cameras only, I need more resolution. And why there are no 2/3" sensors with resolutions like 18MP it they can easily squeeze them into 1/2.3"?????
2/3" lens on 1/2.3" camera?
Using SharpCap for any Non-Astro use including Microscopy, high speed imaging or anything else!
Jump to
- General
- ↳ Forum Rules
- ↳ Announcements
- ↳ What's New
- ↳ Gallery
- ↳ General Discussions
- ↳ SharpCap Beta Testing Forum
- Help and Support
- ↳ SharpCap User Manual
- ↳ SharpCap FAQ
- ↳ Bug Reports
- ↳ How do I?
- ↳ Tutorials
- ↳ Tips and Tricks
- ↳ Feature Suggestions
- ↳ Implemented Features
- ↳ Not Currently Planned
- ↳ Camera Specific
- ↳ Altair Cameras
- ↳ ASCOM Cameras
- ↳ Basler Cameras
- ↳ Celestron / Imaging Source Cameras
- ↳ Point Grey Cameras
- ↳ QHY Cameras
- ↳ Webcams and Frame Grabbers
- ↳ ZWO Cameras
- ↳ Other Cameras
- Using SharpCap
- ↳ Planetary Imaging
- ↳ Solar and Lunar Imaging
- ↳ Deep Sky Imaging
- ↳ Other Astro Imaging
- ↳ Non-Astro Imaging
- ↳ Live Stacking
- ↳ Polar Alignment
- ↳ Scripting
- ↳ The Sequencer and Sequence Planner