Hello, I have c mount lens the 2/3" MC3-03X macro Zero distortion multi-configuration macro lens.
Lens was not cheap at ~700Eur.
http://www.opto-engineering.com/product ... distortion
Now I would like to get the 18MP 1/2.3" camera.
https://en.ids-imaging.com/store/produc ... rev-2.html
Lens manufacturer sent me these charts for my lens, it seems the lens is more like 10MP at 180lp/mm sice FUJINON 12MP is 200lp/mm
The problem is that Pointgrey states that you need 323 lp/mm for 1/2.3" sensor ! No such lenses exit as far as I searched.
How bad will the image be on 1 vs. 2?
1.https://en.ids-imaging.com/store/produc ... rev-2.html
compared to say
2.https://www.baslerweb.com/en/products/c ... 4024-29uc/
I refuse to believe I can use 5MP cameras only, I need more resolution. And why there are no 2/3" sensors with resolutions like 18MP it they can easily squeeze them into 1/2.3"?????
Using SharpCap for any Non-Astro use including Microscopy, high speed imaging or anything else!
1 post • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests