automatic restack with lunary planetary live stacking

Discussions of using SharpCap for Solar or Lunar Imaging
Post Reply
Albanese
Posts: 3
Joined: Sat Nov 07, 2026 2:55 pm

automatic restack with lunary planetary live stacking

#1

Post by Albanese »

Hello
My enquiry concerns a small feature that is missing (or perhaps I’ve simply overlooked it) in the ‘Lunar Planetary Live Stacking’ section, which I have also been unable to implement via a script – namely, the automatic refresh of the stacked image display – and which would be very useful in our efforts to improve images of lunar craters to increase the pointing accuracy of our Moon Laser telescope (lunar telemetry) at the Côte d’Azur Observatory. Do you think it might be possible for you to include this change in one of your future versions?
Thank you in advance, and I’d like to take this opportunity to congratulate you on the excellence of your application, which I also find very useful in my amateur astronomy activities.
Kind regards,
D. Albanese
User avatar
admin
Site Admin
Posts: 17573
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: automatic restack with lunary planetary live stacking

#2

Post by admin »

Hi,

I'm afraid I'm not exactly sure what you are asking about here. The on screen stacked image is updated regularly (as fast as the PC can manage to work through the sharpening and other processing stages). The rate at which the image on screen is being updated is displayed in the UI of the planetary live stacking tool as highlighted below.
Screenshot 2026-11-09 133446.png
Screenshot 2026-11-09 133446.png (21.28 KiB) Viewed 149 times
The value you see there should give you an idea of how quickly the display will reflect any changes that you make to sharpening, colour balance, etc.

If that rate is stuck at zero, or if it is non-zero but the image is not updating then maybe you have encountered a bug and I would be keen to learn more.

thanks,

Robin
Albanese
Posts: 3
Joined: Sat Nov 07, 2026 2:55 pm

Re: automatic restack with lunary planetary live stacking

#3

Post by Albanese »

Hello Robin,
Many thanks for your feedback, and I’m sorry for the slight delay in replying – I’ve been quite busy with other things recently, and I also wanted to make some progress with these tests before getting back to you. That said, and to return to my question, I may have misinterpreted the image feedback, and I also forgot to clarify a few things for you. indeed, as you point out, the image is refreshed in real time – or at least in line with the frame rate and stack length. That said, the main focus of my tests is on whether it’s possible to obtain a corrected image (a frame stack of around 100–150 images) with a refresh time of around 2 seconds at most, and that is what I achieve as long as I do not move the instrument relative to the target (instrument and camera pointed to the Moon, or the camera in simulated mode using videos recorded by the telescope, displayed on a screen and captured by the camera so that I can operate it outside of actual observation), however, it is precisely when I move the image slightly that it refreshes strangely, producing artefacts and causing details to split into multiple images, which do not fade – or fade only very slightly – once the image has stabilized (see the attached images), and so this may have contributed to my misinterpretation of the image, whereas if I continuously perform a manual stack reset using the button throughout the movement, the image is displayed correctly once the stack time has elapsed. So I’m not sure whether this might be down to my data acquisition system, and in particular the graphics card, which is no longer very recent. In fact, for the purposes of my experiment – which will eventually be installed on the 1.50-metre telescope at our Laser Lune facility – we need to target certain craters and landing sites as precisely as possible, and so we have to make small corrections to the pointing; The fact that we’ve already managed to produce a significantly improved image using a stack of just over a hundred images is a major step forward for us, so we’re very interested in your Live Planetary Stacking solution. The telescope, which has a native focal length of 30 metres, has this reduced to +/- 10 metres thanks to a large focal reducer. With this F/D ratio and a latest-generation camera, we can envisage very short exposure times and high frame rates; consequently, we could envisage receiving a corrected image practically in real time, or very close to it. Furthermore, due to the effects of atmospheric turbulence, it is difficult to point precisely at the centre of a crater because of image distortions, and I imagine that the correction allows us to obtain an image of the crater with better resolution, taking into account the average of the geometrically distorted images – which should be fairly close to its real position.
I hope that clarifies my request, and many thanks for your help.
Cordially
Attachments
after reset stack.jpg
after reset stack.jpg (264.29 KiB) Viewed 38 times
after 60s no move camera.jpg
after 60s no move camera.jpg (258.12 KiB) Viewed 38 times
small moving camera.jpg
small moving camera.jpg (265.59 KiB) Viewed 38 times
start live stacking no move.jpg
start live stacking no move.jpg (272.38 KiB) Viewed 38 times
User avatar
admin
Site Admin
Posts: 17573
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: automatic restack with lunary planetary live stacking

#4

Post by admin »

Hi,

ah, OK, that is starting to make sense now. I wonder if you have the stabilization mode setting on the 'Stabilization/Alignment' tab set to 'Planet/Full Disc'? That will cause the sort of effect you are seeing where the alignment doesn't happen as the image shifts. Try changing that setting to 'Surface' and see if that helps. Another way to get a reasonable selection of setting for your use case is to go to the 'Getting Started' tab and press the 'Lunar Partial' button - that will set some defaults for your configuration of a zoomed in view of the moon.

Note that you will always get edge effects if the view seen by the camera starts to shift significantly during stacking, however you shouldn't be seeing the multiple copies of the in-frame craters that you have in your screenshots.

A good way to explore the possibilities of different settings and experiment is to record some fairly long SER files from the camera when you have clear skies. You can then replay these files in SharpCap later (just drag the SER file from Windows Explorer into SharpCap when it is started but before you open a camera). The SER file will play on loop and you can try different settings for stacking to see what works. If you end up completely stuck and still can't make anything work, you can share the SER file with me so that I can experiment.

thanks,

Robin
Albanese
Posts: 3
Joined: Sat Nov 07, 2026 2:55 pm

Re: automatic restack with lunary planetary live stacking

#5

Post by Albanese »

Hello Robin

Many thanks for your answer I’ll have a look at all this and keep you posted
Thanks again for everything

Dominique
Post Reply