Hi,
could you share the whole log - unfortunately the snippet below is missing the details of what is happening in the other threads, which are key to understanding what is going on. If the log is too large to attach as it is, you will almost certainly be able to do so after zipping it up (or you can email it to me using the 'contact us' link at the bottom of the page.
Having said that, Beelink computers having stability issues when you make SharpCap do image processing tasks (increased CPU load) raises alarm bells. There have been a number of cases now where it has turned out that the supplied Beelink power supply just isn't up to the job - when the CPU starts working really hard the PSU can't supply the necessary power and the supply voltage drops. This can lead to immediate crashes or other weird behaviour. If you have a more powerful 12V power supply then try running the Beelink from that to see if it helps (even one of the same power rating but not the beelink one might help).
cheers,
Robin
Solar Scintillation Monitor SSM3
Forum rules
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
-
paulhummerman
- Posts: 3
- Joined: Thu Aug 28, 2025 10:31 pm
Re: Solar Scintillation Monitor SSM3
Robin - thanks. The Beelink is only used for capture, not for any subsequent image processing steps. I'm capturing data at the moment but when finished I will get more of that log. I will also try a better power supply.
- admin
- Site Admin
- Posts: 17580
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Solar Scintillation Monitor SSM3
Hi,
even though you are just capturing, there is still extra work going on when the SSM feature (or the other seeing monitoring features) are activated in SharpCap that can increase the CPU loading. In any case, if you can send the log I can check that out, just in case there is some obvious cause in the log that we are not yet seeing.
cheers,
Robin
even though you are just capturing, there is still extra work going on when the SSM feature (or the other seeing monitoring features) are activated in SharpCap that can increase the CPU loading. In any case, if you can send the log I can check that out, just in case there is some obvious cause in the log that we are not yet seeing.
cheers,
Robin
Re: Solar Scintillation Monitor SSM3
I have the DIY version of the SSSM. I can set it via the "File/Sharpcap settings" but it doesn't appear on the SC screen.
Any ideas?
Ken
FIY the camera is Comm3 and the SSSM Comm8
Any ideas?
Ken
FIY the camera is Comm3 and the SSSM Comm8
"Astronomical Spectroscopy - The Final Frontier" - to boldly go where few amateurs have gone before....
https://groups.io/g/astronomicalspectroscopy
https://groups.io/g/Spectroheliograph
https://groups.io/g/astronomicalspectroscopy
https://groups.io/g/Spectroheliograph
- admin
- Site Admin
- Posts: 17580
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Solar Scintillation Monitor SSM3
Hi Ken,
I don't think that's a problem - the SSM3 doesn't appear in the controls on the right hand side like a focuser or filter wheel. Instead, activate the 'Scintillation Seeing Monitor' tool from the tools menu - that brings up the UI to monitor the SSM device and to automatically start captures when the seeing is at its best.
cheers,
Robin
I don't think that's a problem - the SSM3 doesn't appear in the controls on the right hand side like a focuser or filter wheel. Instead, activate the 'Scintillation Seeing Monitor' tool from the tools menu - that brings up the UI to monitor the SSM device and to automatically start captures when the seeing is at its best.
cheers,
Robin