Hi everyone,
I’ve been using SharpCap for a while and recently ran into an issue that I can’t figure out. The program connects to my ASI533MC Pro without any problem, and I can capture normal preview frames just fine. The problem starts when I click Live Stack. SharpCap runs for a few seconds and then completely freezes. Most of the time I have to close it through Task Manager.
I’m running Windows 11 and the latest version of SharpCap. The camera works normally in ASIStudio, so I don’t think the hardware is the issue.
Has anyone seen this before? I’d really appreciate any suggestions because Live Stacking is the main feature I use SharpCap for.
Thanks!
SharpCap freezes when I start Live Stacking
-
brianallen
- Posts: 1
- Joined: Tue May 19, 2026 7:04 am
SharpCap freezes when I start Live Stacking
_Brain Brian_wheelie life
- admin
- Site Admin
- Posts: 17574
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: SharpCap freezes when I start Live Stacking
Hi,
sorry to hear you are having problems.
SharpCap has a watchdog check that runs in the background, and if the main window becomes unresponsive for more than about 30 seconds then the watchdog is supposed to fire up a second window to offer you the chance to report the problem with the freeze. This will typically appear within 30 to 60 seconds of the main window first freezing. I'm guessing that you aren't seeing this happen or you would have mentioned it... If you do see this - enter some info about what you were doing and try to send the report...
Without being able to send the freeze report, the next best thing is to find and send the SharpCap log after the problem is happened - the log may contain some info about the freeze and at the least will 'cut off' at some point indicating the last thing SharpCap was doing before the problem. Details of how to find the log files can be found here : https://docs.sharpcap.co.uk/4.1/#The%20SharpCap%20Log . A good way to do this would be to show the SharpCap log window and locate the file before you start live stacking - then you can see if anything extra shows up in the log window as a result of starting live stacking, and you will already have the right log file selected.
For general troubleshooting, some things to try
* Use the PC keyboard/mouse/monitor directly instead of a remote connection (if you are currently using a remote connection)
* Make sure the drivers for your graphics card are up to date - try to go back to the manufacturer of the chip on the graphics card (AMD/NVidia/Intel) for updates as they will likely be newer than drivers you find on PC manufacturer websites
* Try selecting a smaller area (ROI) or use binning to see if that avoids the problem - on very low spec PCs, the high resolution of the IMX533 might cause issues when live stacking.
cheers,
Robin
sorry to hear you are having problems.
SharpCap has a watchdog check that runs in the background, and if the main window becomes unresponsive for more than about 30 seconds then the watchdog is supposed to fire up a second window to offer you the chance to report the problem with the freeze. This will typically appear within 30 to 60 seconds of the main window first freezing. I'm guessing that you aren't seeing this happen or you would have mentioned it... If you do see this - enter some info about what you were doing and try to send the report...
Without being able to send the freeze report, the next best thing is to find and send the SharpCap log after the problem is happened - the log may contain some info about the freeze and at the least will 'cut off' at some point indicating the last thing SharpCap was doing before the problem. Details of how to find the log files can be found here : https://docs.sharpcap.co.uk/4.1/#The%20SharpCap%20Log . A good way to do this would be to show the SharpCap log window and locate the file before you start live stacking - then you can see if anything extra shows up in the log window as a result of starting live stacking, and you will already have the right log file selected.
For general troubleshooting, some things to try
* Use the PC keyboard/mouse/monitor directly instead of a remote connection (if you are currently using a remote connection)
* Make sure the drivers for your graphics card are up to date - try to go back to the manufacturer of the chip on the graphics card (AMD/NVidia/Intel) for updates as they will likely be newer than drivers you find on PC manufacturer websites
* Try selecting a smaller area (ROI) or use binning to see if that avoids the problem - on very low spec PCs, the high resolution of the IMX533 might cause issues when live stacking.
cheers,
Robin