I'm in the process of setting up a second rig. I have an older (2023) Beelink mini computer running SC v4.1.12529 and a newer (2025) Beelink mini running SC v4.1.14265, both under Windows 11 Pro.
The old system: Beelink AMD Ryzen 7 5700U, 16 GB RAM, 932 GB SSD, Windows 11 Pro 25H2
The new system: Beelink AMD Ryzen 7 5825U, 32 GB RAM, 477 GB DDS, Windows 11 Pro 25H2
The older system runs like a champ, but the newer one has intermittent issues. I have built an observatory in the backyard with the rigs on adjacent piers. I control the rigs from inside the house over Windows RDP. The internet to the house is over wifi, but it is very fast. The old and new rigs do everything I expect them to do, but when running DSO Live Stack, the new one has problems.
I'll have started up in the late afternoon, connected via RDP, and run my calibration frames. I get a live view with the camera looping, waiting for dark. The camera (ASI2600MC) is cool and ready to go. I start ASIMOUNT for my AM5 mount and PHD2 for guiding. I use the GOTO Catalog to pull up a target and do an autofocus run. Then I start Live Stack. It may run for an hour or more without incident, or it may crash after one or two light frames. I have found no pattern as to how long it will run before crashing.
When it crashes, this is the behavior: I'm monitoring the Live Stack from inside the house. Everything looks normal. Then the camera exposure bar stops updating, and I notice that the screen is frozen. RDP says it's having trouble connecting and eventually gives up. I reconnect by RDP. Normally, it has stored the password and connects without asking for a password, but when this happens, it asks for a password. When I connect, SC, PHD2, and ASIMOUNT have all stopped running. It's as if the computer has restarted or logged out. When I restart SC, the camera has warmed up.
I have multiple ASI2600MCs that I have tried, and I have swapped out USB cables and power supplies. The only constant that I have found is that the old computer with old software runs fine, and the new computer with new software has the problem, but only during Live Stack. It runs dark frame captures and sequences fine. I'm attaching a log file from a recent run. As far as I am able to make out, everything looks fine. It just stops in the middle of a light frame capture with no error message. The PHD2 log also just seems to stop.
I'm not sure whether this is problem with this particular version of SC or whether it is a Windows problem. In the attached log file SC has started a capture with no report of finishing it, but according to the time stamp, the light frame was saved after that last log entry. At the same time as the timestamp of the last light frame, the Windows System log records a critical error: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Would it be advisable to load onto the new computer the same version of SC that is working on the old one? This might tell me whether the problem is with the version or with the computer.
Crashing during Live Stack
Crashing during Live Stack
- Attachments
-
- PHD2_GuideLog_2026-04-27_195925.txt
- (280.6 KiB) Downloaded 3 times
-
- Log_2026-04-27T18_15_52-9028.log
- (402.65 KiB) Downloaded 4 times
- carlomuccini
- Posts: 260
- Joined: Mon Apr 27, 2020 12:42 pm
- Location: Montecatini Terme (PT), Italy
- Contact:
Re: Crashing during Live Stack
Hi
>>> Would it be advisable to load onto the new computer the same version of SC that is working on the old one?
It's certainly the first thing to do
Carlo
>>> Would it be advisable to load onto the new computer the same version of SC that is working on the old one?
It's certainly the first thing to do
Carlo
- admin
- Site Admin
- Posts: 17574
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Crashing during Live Stack
Hi,
based on recent experience, try powering the Beelink with a more powerful 12V power supply than the one it comes with (at least, I think they run from 12V - do check!). We've seen a number of cases recently with similar symptoms - the Beelink mini PC crashes completely when under load, and it seems that under some circumstances they can try to draw more power than the PSU is capable of providing.
cheers,
Robin
based on recent experience, try powering the Beelink with a more powerful 12V power supply than the one it comes with (at least, I think they run from 12V - do check!). We've seen a number of cases recently with similar symptoms - the Beelink mini PC crashes completely when under load, and it seems that under some circumstances they can try to draw more power than the PSU is capable of providing.
cheers,
Robin
Re: Crashing during Live Stack
Thanks. They are 19v (they have a cooling fan), but the power supplies are not particularly beefy. I'll see what I can find. I'm supposing the computer uses more power during a live stack than during a sequence. Is that right?
-
kaymann
- Posts: 297
- Joined: Thu Jun 16, 2022 2:59 pm
- Location: https://azkayfes.blogspot.com/
Re: Crashing during Live Stack
My BLink sounds very similar to yours... (I have zero issues with a AMD Ryzen 7 w/ Radeon 780M GPU, 32 GB RAM, 1TB MVMe, WiFi 6) I run my Spotting ZWO 290 MM via the USB, my Polar Alignment camera via another USB port. I am using the stock 19v power adapter that come with the Mini computer. Do you have a multimeter? As a reference my stock/OEM power adapter is putting out 19.1 unloaded DC Volts and everything works great including the power hungry WiFi 6.meies wrote: Thu Apr 30, 2026 9:40 pm Thanks. They are 19v (they have a cooling fan), but the power supplies are not particularly beefy. I'll see what I can find. I'm supposing the computer uses more power during a live stack than during a sequence. Is that right?
- admin
- Site Admin
- Posts: 17574
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Crashing during Live Stack
Hi,
certainly live stacking (planetary or deep sky) will cause the PC to use more power as significant processing of the images is going on - as opposed to capture, which is largely just moving image data around.
Similarly, running 2 or more cameras at once will draw more power - both in terms of keeping up with the data from the cameras, and the cameras themselves will be drawing power over USB (even if they have a separate 12V for cooling).
The fact that you are seeing a windows reboot indicates that this isn't a simple software crash - something seriously bad needs to happen for windows to reboot, either a crash in the operating system itself (perhaps due to a bug in the camera driver) or a hardware issue. If it was a crash in the camera driver then you would almost certainly get a blue screen of death (or whatever colour it is these days) and a 'BugCheck' entry in the windows event log, rather than the 'unexpected reboot' that you are seeing.
cheers,
Robin
certainly live stacking (planetary or deep sky) will cause the PC to use more power as significant processing of the images is going on - as opposed to capture, which is largely just moving image data around.
Similarly, running 2 or more cameras at once will draw more power - both in terms of keeping up with the data from the cameras, and the cameras themselves will be drawing power over USB (even if they have a separate 12V for cooling).
The fact that you are seeing a windows reboot indicates that this isn't a simple software crash - something seriously bad needs to happen for windows to reboot, either a crash in the operating system itself (perhaps due to a bug in the camera driver) or a hardware issue. If it was a crash in the camera driver then you would almost certainly get a blue screen of death (or whatever colour it is these days) and a 'BugCheck' entry in the windows event log, rather than the 'unexpected reboot' that you are seeing.
cheers,
Robin
Re: Crashing during Live Stack
Thanks, Robin,
I upgraded my Beelink power supply to 19v 6.3a (about double the amperage of the stock brick). I also updated the ZWO drivers and brought Sharpcap up to 4.1.14276.0. I also added a beefier power supply for the cameras (Meanwell LRS-350-12). I'm not sure which of these was actually necessary, but I got through an entire evening of imaging without a hitch.
Regards,
Kevin
I upgraded my Beelink power supply to 19v 6.3a (about double the amperage of the stock brick). I also updated the ZWO drivers and brought Sharpcap up to 4.1.14276.0. I also added a beefier power supply for the cameras (Meanwell LRS-350-12). I'm not sure which of these was actually necessary, but I got through an entire evening of imaging without a hitch.
Regards,
Kevin