I ran a live Deep Sky stack:
I ended up with a displayed image which looked great, so I asked Sharpcap to save it.
It saved the unstretched image. How to save the displayed stretched image?
When I tried to stack the images externally or even using the folder monitor camera I got strange artefacts:
Any idea what might be causing that?
Saving displayed stacked image plus a problem
Saving displayed stacked image plus a problem
Clear skies, David
- admin
- Site Admin
- Posts: 17574
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Saving displayed stacked image plus a problem
Hi,
the save button for deep sky live stacking is a drop down button which has different options for saving...
* 32 bit raw stack data
* 16 bit unstretched stack
* 'Save with Adjustments' - this includes the stretch, colour adjustments and any sharpening/noise reduction
* 'Save exactly as seen' - this gets you what is on screen (includes the above 'adjustments' and any display stretch if that is active)
It's probably the 3rd one that you want. I'm not sure why that's not the default - historical I guess and I haven't reviewed it since. Something to change for 4.2...
For the re-stack, it looks like the dark and or flat is not correctly matching to the light frames. If you look at the saved .CaptureSettings.txt file next to the saved stack, you can check the camera settings for dark, flat, any 'flip' options, etc at the time you were stacking.
cheers,
Robin
the save button for deep sky live stacking is a drop down button which has different options for saving...
* 32 bit raw stack data
* 16 bit unstretched stack
* 'Save with Adjustments' - this includes the stretch, colour adjustments and any sharpening/noise reduction
* 'Save exactly as seen' - this gets you what is on screen (includes the above 'adjustments' and any display stretch if that is active)
It's probably the 3rd one that you want. I'm not sure why that's not the default - historical I guess and I haven't reviewed it since. Something to change for 4.2...
For the re-stack, it looks like the dark and or flat is not correctly matching to the light frames. If you look at the saved .CaptureSettings.txt file next to the saved stack, you can check the camera settings for dark, flat, any 'flip' options, etc at the time you were stacking.
cheers,
Robin
Re: Saving displayed stacked image plus a problem
Thanks Robin,
Turns out the problem with the images was a security light.
David
Turns out the problem with the images was a security light.
David
Clear skies, David
- admin
- Site Admin
- Posts: 17574
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Saving displayed stacked image plus a problem
Hi,
oops, yes, that will ruin your night of imaging
If it's a persistent problem, you might want to consider an asymmetric dew shield type shade - basically a dew shield with one side longer than the other. Put the long side pointing toward the security light, and that will ensure that the doesn't illuminate the inside of the shield at all. Hope that sort of makes sense.
cheers,
Robin
oops, yes, that will ruin your night of imaging
If it's a persistent problem, you might want to consider an asymmetric dew shield type shade - basically a dew shield with one side longer than the other. Put the long side pointing toward the security light, and that will ensure that the doesn't illuminate the inside of the shield at all. Hope that sort of makes sense.
cheers,
Robin