I was using my EOS 60Da the other night with Sharpcap using 30s exposures and "gain" (ASA) set to 800. I was able to do Deep Sky live stacking.
Tonight I was trying to do the same again. But even though the 30s "Live View" exposures looked pretty much right, when I switched to live stacking the displayed frame at the end of the first exposure was whited out completely.
Any ideas what I might have been doing wrong?
Thanks, David
ASCOM DSLR driver problem
ASCOM DSLR driver problem
Clear skies, David
- admin
- Site Admin
- Posts: 17574
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: ASCOM DSLR driver problem
Hi David,
one possibility here is that you had a stretch set up in the display stretch area on the right to see some details in the individual frames. Then, when you activate live stacking there is also a stretch applied by the live stacking, and the combination of the two gives a whiteout.
There is an option in the right-hand-most 'Settings' tab of the live stacking area to automatically disable the display stretch when live stacking is activated. You probably want to turn that on, or just manually remove the display stretch when activating live stacking.
cheers,
Robin
one possibility here is that you had a stretch set up in the display stretch area on the right to see some details in the individual frames. Then, when you activate live stacking there is also a stretch applied by the live stacking, and the combination of the two gives a whiteout.
There is an option in the right-hand-most 'Settings' tab of the live stacking area to automatically disable the display stretch when live stacking is activated. You probably want to turn that on, or just manually remove the display stretch when activating live stacking.
cheers,
Robin