Pondering an ideal telescope - or a "winter fantasy"

Anything that doesn't fit into any of the other forums
ChrisR Oz
Posts: 224
Joined: Tue Sep 28, 2021 11:03 am
Location: Melbourne

Pondering an ideal telescope - or a "winter fantasy"

#1

Post by ChrisR Oz »

I am hoping you’ll indulge my wet/cloudy weather, winter ramblings about an ideal telescope upgrade. My interests lie in deep space objects, which are limited by photons and resolution. I am drawn to far off galaxies or closer planetary nebulae, with similarly small apparent size, such as these examples.

C74 (NGC 3132) - Eight Burst PNe
C74 (NGC 3132) - Eight Burst PNe
C74-crop.jpg (50.24 KiB) Viewed 1482 times
C59 (NGC 3242) - Ghost of Jupiter PNe
C59 (NGC 3242) - Ghost of Jupiter PNe
C59-crop.jpg (24.74 KiB) Viewed 1482 times
PGC 19481 - Blue Ring galaxy
PGC 19481 - Blue Ring galaxy
PGC 19481-crop.jpg (732.86 KiB) Viewed 1482 times
C74 (NGC 3132, mag 9.8, 2000 ly) Eight Burst PNe with very hot central white dwarf (100,000 C - we see less than 1% radiation in the visible). C59 (NGC 3242, mag 7.7, 4800 ly) Ghost of Jupiter PNe. PGC 19481 (mag 14, 300 Mly) Blue Ring galaxy, showing a ring of hot blue young stars believed to be triggered by a head-on galaxy collision.

These PNe are quite bright. But PGC 19481 is magnitude 14 and 300 Mly distant. Objects like it strain resolution and are starved for photons. I feel a rush of ‘aperture fever’ coming on …

Photons argue for more aperture, that’s inescapable, at least up to practical limits imposed by weight and cash. Resolution is largely a question of seeing, especially in my area. Discussions online about ideal image-scale tend to converge somewhere around 0.75 arc-seconds per pixel, with only ‘mountain top’ conditions warranting significantly smaller image scale. My best data (Centaurus A) used a PixInsight FWHM cut-off of 2.62 pixels and an average of 2.55, which is 1.64 arc-seconds. Nyqvist sampling (subdivide by 2 or more) would suggest an ideal image scale for this data of 0.82 or less. The data used 0.64 (EdgeHD 8” with 0.7x reducer), which worked well, but may have still been slightly over-sampled. However, guiding down at 0.3-0.4 arc-seconds RMS total is rare for me (2-3 days per year), and larger FWHM due to seeing is far more common. It seems that target image scale should be no smaller than 0.8 arc-seconds per pixel in my case. Hence, one goal of this exercise is to target ideal image-scale in order to maximise SNR. Put another way, I don’t want to squander SNR with an image scale that is too small.

Of course, I’d also like to target those juicy nebulae that we are blessed with in the Southern Skies, which becomes more a question of field of view, aggravated I suppose by going for long focal length to target DSO. Hence, I would also like to increase my FOV well beyond my current 0.75° x 0.5°. This argues for a full-frame camera and a OTA image train with a well corrected flat field large enough. My Celestron EdgeHD 8” has been great. But the field is restricted when using the 0.7x reducer to about 28 mm. That has been a good match to the ZWO 294MC Pro, which gave me an economical entry into astronomy. But it seems the right time to go to a larger camera.

This quest for the right image scale is complicated by the availability of camera pixel sizes, when considering only the larger cameras. Basically, we only really have a choice between 3.76 um (Sony IMX 455, e.g. ZWO 6200) and 5.94 um (Sony IMX 410, e.g. ZWO 2400). This in turn means, for an image scale of 0.8 arc-second per pixel, that we are focussing on focal lengths around 970 mm (3.76 um pixels) or 1530 mm (5.94 um pixels). Of course, we could bin 2x2 the 3.76 um case to use 1940 mm (7.52 um pixels effective) at smaller FOV. These mostly argue for fast focal ratios as our aperture increases.

This figure endeavours to capture what’s out there in the way of suitable OTAs, although many are way outside my budget. It plots each as focal length versus image scale, with curves for 5 cameras with pixel sizes of 2.9, 3.76, 4.63, 5.94 and 10 um. The latter is too expensive, so not really an option. But it is representative of larger pixels, e.g. in CCDs. And there are no full-frame cameras with 2.9 and 4.63 um pixels. There are some APS-C sized cameras with around 4.78 um pixels (IMX 071, e.g. ZWO 071), which are not shown. Hence, most OTAs are plotted along the 3.76 and 5.94 um curves, with tick marks showing major axis FOV. The star symbols are grey for the smaller OTAs, green for 14” (350 mm) and red for 16” (400 mm) OTAs, the largest considered. The size of each symbol is proportional to pixel signal, including the effects of aperture and image scale.

OTA FL versus Image scale, plotted on camera curves
OTA FL versus Image scale, plotted on camera curves
Ideal telescopes.jpg (234.88 KiB) Viewed 1482 times

The fast Newtonian Astrographs stand out, with some noteworthy exceptions, such as the ASA H400 F2.4, a very capable (and super heavy and expensive) platform with nearly 2.2° FOV. The Newts have small linear obstruction values and so lose fewer photons. A few cluster around the target 0.8 image scale, such as the 16” and 14” Hubbles and 16” Dreamscope and have sensitivity of 5-6x what I’m used to with the EdgeHD8. The table below summarises the vital statistics of the OTAs. Amongst the 14” scopes, the Hubble HNA14 stands out with a sensitivity of 5.1 compared to 2.3-3.8 for the rest. It’s nice to think of collecting the same photons per pixel in one hour that previously took 5 hours.

OTA table showing relative sensitivity
OTA table showing relative sensitivity
Ideal telescopes table2.jpg (303.82 KiB) Viewed 1482 times
OTA table notes
OTA table notes
Ideal telescopes table2-notes.jpg (73.07 KiB) Viewed 1482 times
Celestron EdgeHD 8, Focuser; iOptron CEM120 mount on pier; Starlight Xpress AO, OAG and Filter Wheel; ZWO 2400MC, 294MC/294MM Pro and 174MM mini; SharpCap Pro, PHD2, Televue Powermate 2x, Baader Neodymium, Astronomik CLS-CCD, ZWO UV/IR, Duo filters
User avatar
admin
Site Admin
Posts: 17574
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Pondering an ideal telescope - or a "winter fantasy"

#2

Post by admin »

Hi,

wow! I love a good spreadsheet when deciding between different alternatives, but you've really put some thought into all the aspects of this and how it affects your imaging!

I'll jump in with a few thoughts on the camera side, which is where my knowledge is strongest...

* Be wary about older generation cameras, even if they have pixel sizes that seem to offer an advantage. The newer generation sensors (ASI2600, 533 in the slightly smaller formats) are significantly improved in terms of both reduced read noise and minimal pattern noise/thermal noise - I'm not sure that I would go back to older generations (ASI071, 294, etc) just because of pixel size

* Over sampling to some extent is, in my opinion, not a massive issue. I see main effect is the reduction in photons per pixel, which will correspondingly push up the sub-exposure length needed. However picking a camera with a lower working read noise (~3.5 at min gain on 6200 vs ~7 at min gain on 2400) pretty much counters this effect.

On the telescope side, do consider how 'high maintenance' a telescope will be in terms of things like difficulty and frequency of collimation - nothing worse than not being able to image on a lovely clear night because you have struggled with collimation for 30+ minutes...

cheers,

Robin
ChrisR Oz
Posts: 224
Joined: Tue Sep 28, 2021 11:03 am
Location: Melbourne

Re: Pondering an ideal telescope - or a "winter fantasy"

#3

Post by ChrisR Oz »

Hi Robin,

Thanks for the tips. Perfect. Your experience with cameras, and particularly managing noise, was the aspect that attracted me to SharpCap and your talks on the subject.

I agree about the old cameras. I use a ZWO 294MC and so have experienced amp-glow and pattern noise, and the need for dithering, etc. I included this (and mention of 071) simply to be representative of some intermediate scale pixel, which seems lacking. A new generation full-frame camera in this space would be very useful. But I am not considering these as options. The two full-frame cameras seem the best choice.

I tend to be attracted to the high dynamic range point, just after the HCG drop-off, with read noise around 1.5e. This seems optimum to me most of the time (I.e. for DSO), unless chasing planets (not withstanding the long discussions about the dubious behaviour of the 294 at this gain). With both the 6200 and 2400 having ~1.5e at this point, it seems mixing this into the bigger pixel, with more collected photons, makes good sense. How do you see that?

Ideal sub-exposure length is complicated these days with thoughts of minimising effects due to seeing (or really more guiding errors, mount irregularities, wind effects) and pursuing “lucky imaging” improvement in resolution. That argues for a larger pixel that will be better suited to shortening the exposure.

Maintenance, such as regular collimation, is tricky, as you don’t really know what you get until you’re using it. I know I’ve been spoilt with the Celestron SCT. With the analysis pushing me in the direction of a Newtonian Astrograph, I will invest in a good laser collimation tool.

Cheers, Chris.
Celestron EdgeHD 8, Focuser; iOptron CEM120 mount on pier; Starlight Xpress AO, OAG and Filter Wheel; ZWO 2400MC, 294MC/294MM Pro and 174MM mini; SharpCap Pro, PHD2, Televue Powermate 2x, Baader Neodymium, Astronomik CLS-CCD, ZWO UV/IR, Duo filters
User avatar
oopfan
Posts: 1409
Joined: Sat Jul 08, 2017 2:37 pm
Location: New York

Re: Pondering an ideal telescope - or a "winter fantasy"

#4

Post by oopfan »

Hi Chris,

That's some fine work! Each time I look at it I learn something new.

Brian
ChrisR Oz
Posts: 224
Joined: Tue Sep 28, 2021 11:03 am
Location: Melbourne

Re: Pondering an ideal telescope - or a "winter fantasy"

#5

Post by ChrisR Oz »

Thanks Brian,

Planetary imaging will take some more work though, due to the fast optics. My current 2x Powermate will leave me a bit short. A 5x Powermate may be needed to get to an F# around 7x my pixel size (e.g. going with a ZWO 585MC). It will be great to capitilize on the larger aperture for planetary imaging.

Cheers, Chris.
Celestron EdgeHD 8, Focuser; iOptron CEM120 mount on pier; Starlight Xpress AO, OAG and Filter Wheel; ZWO 2400MC, 294MC/294MM Pro and 174MM mini; SharpCap Pro, PHD2, Televue Powermate 2x, Baader Neodymium, Astronomik CLS-CCD, ZWO UV/IR, Duo filters
User avatar
admin
Site Admin
Posts: 17574
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Pondering an ideal telescope - or a "winter fantasy"

#6

Post by admin »

Hi,

one thing to throw into the mix for planetary imaging is to remember that a 2 micron pixel camera and no barlow will probably give better images than a 4 micron pixel camera and a 2x barlow (all else being equal - i.e. camera sensors of comparable quality/sensitivity). The barlow effectively adapts the optics to a larger pixel size, but in the process you will lose some light and some image quality compared to not having any extra glass there at all...

Worth having a look at some of the small pixel cameras to see if they might suit either with no barlow, or with the existing 2x one. On the other hand, finding the target with long focal length and a small camera can be 'fun'...

cheers,

Robin
ChrisR Oz
Posts: 224
Joined: Tue Sep 28, 2021 11:03 am
Location: Melbourne

Re: Pondering an ideal telescope - or a "winter fantasy"

#7

Post by ChrisR Oz »

Hi Robin,

Yes, there are some smaller pixel cameras out there, around 2 um. But they are quite small. The 585 is attractive as it combines 2.9 um pixels with a 13 mm sensor, so you have more FOV to find and keep that elusive planet. That said, the FOV of about 0.11° (HNA14 with 5x Powermate) will be a lot smaller than the 0.26° I am accustomed to using the EdgeHD8 (with 2x Powermate). The EdgeHD8 works quite easily using SC’s ROI tracking. Hopefully SC will work well to track at that smaller scale.

Another point is that the Televue Powermates seem to have very little losses and just add magnification. The 2x works brilliantly. I hope to make use of the parfocal nature of these by swapping a 5x Powermate in and out when searching for that planet very near the FOV.

Cheers, Chris.
Celestron EdgeHD 8, Focuser; iOptron CEM120 mount on pier; Starlight Xpress AO, OAG and Filter Wheel; ZWO 2400MC, 294MC/294MM Pro and 174MM mini; SharpCap Pro, PHD2, Televue Powermate 2x, Baader Neodymium, Astronomik CLS-CCD, ZWO UV/IR, Duo filters
ChrisR Oz
Posts: 224
Joined: Tue Sep 28, 2021 11:03 am
Location: Melbourne

Re: Pondering an ideal telescope - or a "winter fantasy"

#8

Post by ChrisR Oz »

I thought an update was called for. I purchased the Hubble Optics HNA14. It was too good a value to miss. But there have been some adventures along the way. Firstly, it was much heavier than advertised. The web site showed its weight at about 19 kg. It was actually around 30 kg. (The web site has since been revised.) This meant thinking about a fixed setup (no heaving this onto a mount), an observatory and a new mount on a pier. Hence, over the past year, I have built an observatory with a roll off roof, purchased an iOptron CEM120 mount able to carry the weight (including my imaging train, which includes the Starlight Xpress AO, OAG, ZWO 2400MC Pro and finder scope, all up about 3 kg) and pursued putting the HNA14 together. Perhaps unsurprising for a kit, the latter had a couple of incorrect components, which have slowly been corrected. Still waiting on longer carbon truss tubes to make focus (F/# ended up 4.44, rather than expected 4.2). So getting close now ...

In the meantime, the ZWO 4400MC Pro has been released with 4.40 um pixels. This fills the gap in available full-frame cameras between the 6200MC (3.75 um pixels) and the 2400MC (5.94 um pixels). And a couple of new OTAs have appeared. Hence, I have updated my plot and table ...

Finding the "ideal telescope" plot
Finding the "ideal telescope" plot
Ideal telescope.jpg (217.96 KiB) Viewed 562 times

A survey of astrographs ...
A survey of astrographs ...
Ideal telescope table.jpg (346.56 KiB) Viewed 562 times

And I am now a fan of BlurXterminator and NoiseXterminator, which are now permanant steps in my PixInsight workflow. The improvement in the images I posted previously is stark ...

NGC 3132 (left), NGC 3242 (centre), PGC 19481 (right)
NGC 3132 (left), NGC 3242 (centre), PGC 19481 (right)
Trio.jpg (249.26 KiB) Viewed 562 times

I'll let you know how the telescope saga unfolds in due course ...
Cheers, Chris.
Last edited by ChrisR Oz on Sat Mar 28, 2026 1:24 am, edited 2 times in total.
Celestron EdgeHD 8, Focuser; iOptron CEM120 mount on pier; Starlight Xpress AO, OAG and Filter Wheel; ZWO 2400MC, 294MC/294MM Pro and 174MM mini; SharpCap Pro, PHD2, Televue Powermate 2x, Baader Neodymium, Astronomik CLS-CCD, ZWO UV/IR, Duo filters
ChrisR Oz
Posts: 224
Joined: Tue Sep 28, 2021 11:03 am
Location: Melbourne

Re: Pondering an ideal telescope - or a "winter fantasy"

#9

Post by ChrisR Oz »

Here is the observatory, with Celestron EdgeHD8" installed ...

Observatory with roof rolled back
Observatory with roof rolled back
IMG_8521.jpg (961.35 KiB) Viewed 562 times

EdgeHD8 on iOptron CEM120 on pier
EdgeHD8 on iOptron CEM120 on pier
IMG_8537.JPEG (999.33 KiB) Viewed 562 times
Celestron EdgeHD 8, Focuser; iOptron CEM120 mount on pier; Starlight Xpress AO, OAG and Filter Wheel; ZWO 2400MC, 294MC/294MM Pro and 174MM mini; SharpCap Pro, PHD2, Televue Powermate 2x, Baader Neodymium, Astronomik CLS-CCD, ZWO UV/IR, Duo filters
User avatar
admin
Site Admin
Posts: 17574
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Pondering an ideal telescope - or a "winter fantasy"

#10

Post by admin »

Hi Chris,

sounds like an adventure with the Hubble Optics telescope, will be good when you have it all sorted and it is in action. The ROR observatory looks good - sliding off at half way gives you access to the lower altitudes nicely. It looks solidly built from the interior photos, so I guess you built it from scratch rather than anything off-the-shelf (never seen anything off-the-shelf with that sort of timber dimensions!)

cheers,

Robin
Post Reply