Hi everyone,
I’m experiencing an unusual issue and wanted to see if anyone else has encountered something similar. A few nights ago, I was imaging Saturn and later discovered that all of my captures had been saved as PNG frames. I initially assumed I must have accidentally changed a setting, as I was fairly certain the output was configured for SER video files.
Last night, while imaging Jupiter, the first thing I did was confirm that the output was set to SER. Everything looked correct, so I began my 30-second capture. However, at the end of the night, I found that all files were once again saved as PNGs.
I’ve updated to the latest release and will test again on the next clear night, but I found this behavior odd and wanted to ask if anyone else has experienced this issue or might have insight into what could be causing it.
Thank you.
Ser being saved as PNG on two occasions
-
kaymann
- Posts: 297
- Joined: Thu Jun 16, 2022 2:59 pm
- Location: https://azkayfes.blogspot.com/
Re: Ser being saved as PNG on two occasions
I cannot give specific dates and times but I have had this happen on occasion. The real annoyance is that I would never take planetaries in a series of hundreds of PNG's and converting them into SER's gives very poor results.
- admin
- Site Admin
- Posts: 17573
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Ser being saved as PNG on two occasions
Hi,
three things can change the output format for you, so those are the things to check
1) The output format being in 'Auto' mode. In auto mode, a video format will be set for short exposures and a still image will be set when the exposure is longer - the changeover is at an exposure of 2s. This will pick your 'preferred' output formats as configured in the saving settings if they are compatible with the camera images
2) Switching the camera into still mode (turning off live view) will switch to a still output format. Interestingly it doesn't go back to video when you turn on live view again, even with the output format set to Auto - I will check on that...
3) Loading a capture profile will set the output format - you can use the manage capture profiles window to see if any of your profiles set the output format to PNG.
cheers,
Robin
three things can change the output format for you, so those are the things to check
1) The output format being in 'Auto' mode. In auto mode, a video format will be set for short exposures and a still image will be set when the exposure is longer - the changeover is at an exposure of 2s. This will pick your 'preferred' output formats as configured in the saving settings if they are compatible with the camera images
2) Switching the camera into still mode (turning off live view) will switch to a still output format. Interestingly it doesn't go back to video when you turn on live view again, even with the output format set to Auto - I will check on that...
3) Loading a capture profile will set the output format - you can use the manage capture profiles window to see if any of your profiles set the output format to PNG.
cheers,
Robin
-
Beyondlumen
- Posts: 13
- Joined: Mon Jan 22, 2024 8:29 am
Re: Ser being saved as PNG on two occasions
Thanks everyone I will set a profile and will update this post of it still occurs might be a while since you know the weather machine is out of service lol
nothing but clouds