Saved Stack question??

Anything that doesn't fit into any of the other forums
Post Reply
Dale R.
Posts: 22
Joined: Wed Mar 28, 2018 4:35 pm

Saved Stack question??

#1

Post by Dale R. »

I am using the "SAVE STACK" option to save my FIT files to process later in PI. I do my flats and darks in sharpcap too and apply in Pixinsight. I use the script WBPP. The last week or so I have been getting odd dark dots on my images that look like the size of small stars or hot pixels.(dozens of them) It has been driving me nuts. In the PI forum, I sent a member one of my RAW frames. He said he could not see any hot pixels and thought a dark had been applied..??? I thought he was crazy but when I did WBPP and did NOT use a dark, my images were free of the dozens of dark spots (ZWO2600)

Only thing that changed was I am guiding now with PHD2 and wasn't before. I don't think I changed any setting or updated Sharpcap in that time.

I am I going crazy or is darks and or flats being applied to the FIT files I have been saving all along..or did I go and hit some button that is hauntimg me???
User avatar
admin
Site Admin
Posts: 17573
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Saved Stack question??

#2

Post by admin »

Hi,

the short answer is that darks and flats (if you have turned them on in SharpCap) are applied by SharpCap to the image data of each frame *before* it is added to the stack, so if you save the stacked image then darks and flats are already applied and you should not try to apply them again. It has always been this way, because it is critical to apply the dark/flat before stacking (they will not work properly if applied to the image after stacking).

On the other hand, if you have set up live stacking in SharpCap to save the 'raw' frames from the camera as well, those are saved with no processing applied, so you can rework those in other applications like PI.

Just to note, if you are *not* live stacking then the frames saved by the normal 'Start Capture' button in SharpCap *do* contain the dark/flat correction if it is enabled - the fact that the 'raw' frames in live stacking are completely untouched is a special Live Stacking thing to enable the option to 'see it on screen in SharpCap, fully reprocess later' approach to work.

hope this helps,

Robin
Dale R.
Posts: 22
Joined: Wed Mar 28, 2018 4:35 pm

Re: Saved Stack question??

#3

Post by Dale R. »

OK. I think I didn't change anything. I included a screenshot of my settings. I have always done it this way with no issues. Under the "RAW FRAMES" tab I selected "SAVE STACKED" and they would NOT have flats or darks applied. I have attached a raw frame via filebin. On the Pixinsight forum, they looked at the raw and thought a dark was applied??? ZWO2600dou

https://filebin.net/1gjc7uh89jsbv4ix
Attachments
Screenshot (4).png
Screenshot (4).png (504.35 KiB) Viewed 1257 times
User avatar
admin
Site Admin
Posts: 17573
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Saved Stack question??

#4

Post by admin »

Hi,

yes, the frames that are saved using the 'Save Stacked' option for raw frames are untouched (no dark/flat correction applied, no other processing applied). I have just looked at the frame that you have shared and I can't see any evidence that it has darks or flats pre-applied to it.

* when stretched strongly there is some vignetting at the corners, particularly the top left
* Hot pixels are visible in the image

The way I looked into this was to drag the FITS file into SharpCap - that opens it in the deep sky test camera and will show it repeatedly as a 'captured image' every 8s. Now open live stacking, which starts stacking that repeated image, then use the 'Colour Calibration' feature in live stacking - that gets rid of the green background and colour balances the image, but also allows a stronger stretch without the image saturating to green and lets you see the hot pixels and the vignetting.

cheers,

Robin
Dale R.
Posts: 22
Joined: Wed Mar 28, 2018 4:35 pm

Re: Saved Stack question??

#5

Post by Dale R. »

For closure on this topic:
I tried everything to get rid of the black dots. I posted a long thread in PI forums. It was interesting when a member posted his and my dark fram side by side. Mine is on the left and his is on the right ZWO2600 camera.:
1761672648221 (1).png
1761672648221 (1).png (114.44 KiB) Viewed 1207 times
It appears the HOT pixel is off a bit and is a hot rectangle instead of one square. This would make sense then to over saturate an unaffected pixel and make a black dot.
In the end I jumped on NINA and made a new dark. I used the Sharpcap lights/flats and the NINA dark and WBPP in PI was great! I will try darks in Sharpcap next object I image to test it. It seems the last couple images sessions have had the black dot issue in one form or other. It correlates with guiding. I only have issues in guided images. Odd...but there it is!!

Still LOVE sharpcap and if I just need an external program for a dark, that is no big deal!
User avatar
admin
Site Admin
Posts: 17573
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Saved Stack question??

#6

Post by admin »

Hi,

definitely something odd going on there in your image on the left - it almost looks more like tetris blocks than the normal sensor noise seen in the image on the right.

I wonder if you have set some odd camera control in SharpCap to an unusual value and then that value is being preserved by SharpCap's option to reload the previous settings when you open the camera. Try opening the camera with the <CTRL> key pressed down to prevent the reload of previous settings. I must admit that I can't quite work out what setting would do that to an image though... Almost like some noise reduction option?

cheers,

Robin
Dale R.
Posts: 22
Joined: Wed Mar 28, 2018 4:35 pm

Re: Saved Stack question??

#7

Post by Dale R. »

Sounds like a plan! I might do a fresh install and make sure my ZWO drivers are updated. I tried messing with NINA and it REALLY makes me appreciate Sharpcap!!!
Post Reply