How to use Finding (Go-to) and Guiding (PHD2) with same camera?

Anything that doesn't fit into any of the other forums
Post Reply
Ehud
Posts: 62
Joined: Fri Nov 24, 2023 1:09 pm

How to use Finding (Go-to) and Guiding (PHD2) with same camera?

#1

Post by Ehud »

Hi Robin,
I am using a Celestron C11 for viewing or EAA and a finder scope with a camera for both finding objects using Sharpcap Go-to and than use PHD2 over same camera to keep center view on the object.
Must I disconnect the camera and mount from Sharpcap when switching from Finder Go-to to Guider functions, or is there a way to use them together?
Thanks,
Ehud.
User avatar
admin
Site Admin
Posts: 17573
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: How to use Finding (Go-to) and Guiding (PHD2) with same camera?

#2

Post by admin »

Hi Ehud,

unfortunately you will have to disconnect one application to use the camera in the other. In general cameras do not work in more than one application at a time - you will either get errors trying to open the camera when it is already open in another application, or, worse, random unexpected behaviour with it open in two applications at once.

Just for completeness, if you have a QHY camera there may be an option to do this - QHY cameras have a feature called 'Enable Live Broadcast', which you can turn on in SharpCap and then connect another application to a particular webcam that will appear (maybe you need to install more QHY software for this to work - it's a long time since I used it). With this option, SharpCap controls the camera, but the other application can get the images.

cheers,

Robin
Ehud
Posts: 62
Joined: Fri Nov 24, 2023 1:09 pm

Re: How to use Finding (Go-to) and Guiding (PHD2) with same camera?

#3

Post by Ehud »

Thanks Robin.
What about the mount? - Sharpcap currently command the Clearsky ST20 through an Ascom driver.
User avatar
admin
Site Admin
Posts: 17573
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: How to use Finding (Go-to) and Guiding (PHD2) with same camera?

#4

Post by admin »

Hi,

it depends on the way the ASCOM driver is written - if it runs as its own separate application then most likely 2 or more applications can connect to it at once with no problems. If you *do* find you have issues with connecting the second application then using the 'ASCOM Device Hub' is the way to get things working - set up all the applications to talk to the device hub as their mount, then set up the device hub to talk to the real ASCOM driver - that allows the device to be shared nicely.

cheers,

Robin
Jean-Francois
Posts: 858
Joined: Sun Oct 13, 2019 10:52 am
Location: Germany

Re: How to use Finding (Go-to) and Guiding (PHD2) with same camera?

#5

Post by Jean-Francois »

Hello,

For completeness ... for the user of QHY cameras ... it is possible to connect 2 softwares with the same camera with the Broadcast WDM driver.

The first step is to install the Broadcast driver if it is not done yet. Restart the All-in-One installation file and select the Broadcast WDM driver.

After that you can start SharpCap and connect the camera as usual (from the "QHY Cameras"):
QHY_to_PHD2_Broadcast_1.jpg
QHY_to_PHD2_Broadcast_1.jpg (170.08 KiB) Viewed 855 times
Select MONO8 (it works only in 8 bits) and activate the "Enable Live Broadcast".

Next steps are in PHD2 ...
QHY_to_PHD2_Broadcast_2.jpg
QHY_to_PHD2_Broadcast_2.jpg (198.76 KiB) Viewed 855 times
Select the "Windows WDM-style webcam camera", click on Camera choice and select the same camera mode as in SharpCap.

If all is working properly ... then you will have the same image in PHD2:
QHY_to_PHD2_Broadcast_3.jpg
QHY_to_PHD2_Broadcast_3.jpg (143.11 KiB) Viewed 855 times

PHD2 does an average of the images stream. It means in the example above ... it was 50 ms exposure in SharpCap with noisy single images, but 1000 ms in PHD2 with much less noise.

The use of the WDM Broadcast driver is nice for guiding purpose. But the 8 bit limitation is a limitation for the deep sky imaging.

Regards,
Jean-Francois
Ehud
Posts: 62
Joined: Fri Nov 24, 2023 1:09 pm

Re: How to use Finding (Go-to) and Guiding (PHD2) with same camera?

#6

Post by Ehud »

Hi Robin,
An idea for anew feature: After finding a deepsky object using GoTo, start automatic to maintain it in the center of image, using same camera. In a way, it practically provides also guiding.

What do you say?
Thanks,
Ehud.
User avatar
admin
Site Admin
Posts: 17573
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: How to use Finding (Go-to) and Guiding (PHD2) with same camera?

#7

Post by admin »

Hi,

this feature already exists if you are Deep Sky live stacking in SharpCap - in the 'Guiding' tab of the live stacking control area there are options on the right to automatically recenter the image if the drift exceeds a specified number of pixels. This uses plate solving to work out the orientation and scale of the image and the live stacking drift measurement to determine when it has moved 'too far' and needs to be corrected.

cheers,

Robin
Post Reply