## SharpCap 3.2 Beta now available

Discussions, Bug Reports and Issues related to Beta versions of SharpCap
Posts: 2853
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

### Re: SharpCap 3.2 Beta now available

Just as a tip - search the docs with Google - search for

Code: Select all

alignment site:docs.sharpcap.co.uk


Robin

turfpit
Posts: 766
Joined: Mon Feb 13, 2017 8:13 pm
Location: UK
Contact:

### Re: SharpCap 3.2 Beta now available

I like that. thanks Robin.

Dave

Hibou
Posts: 24
Joined: Thu Jul 05, 2018 3:25 pm
Location: French Alps
Contact:

### Re: SharpCap 3.2 Beta now available

Yes, the Google site: filter can always be used to restrict searches to a particular page/site. And Dave may not approve, but I have a suggestion for another feature viewtopic.php?f=27&t=1008

turfpit
Posts: 766
Joined: Mon Feb 13, 2017 8:13 pm
Location: UK
Contact:

### Re: SharpCap 3.2 Beta now available

Alan

I have completed too many orbits of the Sun to rise to that

Dave

Hibou
Posts: 24
Joined: Thu Jul 05, 2018 3:25 pm
Location: French Alps
Contact:

### Re: SharpCap 3.2 Beta now available

Hi Robin.

Thanks for the v3.2.5678 update. Actually I suspect that the bit order is now wrong, and that it was already correct in v3.2.5664 Previously the hot pixels (and amp glow) were at low light levels, but now in v3.2.5678 they are ahown at discrete high light levels (?) I have posted 4s 0-gain FLIR IMX249 screen shots and images, with names that may be self explanatory, first a screen shot, second a FITS Liberator analysis, and third the saved FITS file.

http://neutronoptics.com/resources/Shar ... -4s-0g.jpg
http://neutronoptics.com/resources/Shar ... g-dark.jpg
http://neutronoptics.com/resources/Shar ... 4s-0g.fits

http://neutronoptics.com/resources/Shar ... -4s-0g.jpg
http://neutronoptics.com/resources/Shar ... g-dark.jpg
http://neutronoptics.com/resources/Shar ... 4s-0g.fits

Unfortunately I will not have my IMX249 camera after today, but hope that this might still help.

Regards, Alan.

Posts: 2853
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

### Re: SharpCap 3.2 Beta now available

Aargh, that was what I was afraid of. The byte order swap definitely helped with the camera i have, but that is a different sensor from a different manufacturer. I'm going to have to re read the documentation now to see if there is some way to find out the byte order for the current camera from the sdk.

Cheers,

Robin

PilotAstronomy
Posts: 5
Joined: Thu Aug 02, 2018 10:40 pm

### Re: SharpCap 3.2 Beta now available

Robin,

I am really enjoying the new features in the Beta and for the most part they work pretty good. My absolute favorite is the Folder Monitor Camera, though I might be using it in an unintended way!

On my imaging computer, I like to set up my image sequences to be "hands off" and use Sequence Generator Pro. Then, periodically throughout the evening/night, on a regular interval, the files are transferred to my desktop PC in my nice cozy office and put them in a folder. I can then set that folder as the Folder Monitor Camera and run through the files quickly in a LiveStack to get a nice view of what's going on with my images.

I have two bits of feedback, though.

1) The "LiveStack" of a Folder Monitor Camera isn't entirely hands off. When I'm monitoring a folder but *NOT* LiveStacking it will play the newest frame in the view as intended, but when I am livestacking those frames as they come in, they do NOT get added to the stack. The best workaround I've come up with is to clear the LiveStack, resume it, and click the "Rewind and Replay All Frames" button. This effectively LiveStacks all my frames (skipping the first one, I think?)

2) I have an ultrawide monitor on my desktop PC and would LOVE to take advantage of the multimonitor support, but it doesn't recognize that I have that much space. Sharpcap gets spread out on my ultrawide, which is fine, but it ends up being a bit awkward with the LiveStack still on the bottom (by default) but VERY wide with lots of wasted space. I know I can "unpin" the livestack window, but it ends up being a cluncky solution at best. Not sure how the multimonitor actually works so I can't provide feedback on it and how to apply it in an ultrawide setting, but if there's a way to have your image view in a "separate" window from the main sharpcap menus and various settings windows that'd be what I'm looking for.

As always, I really enjoy the program and all the new features are amazing. Next feature I'm going to attempt to use and provide feedback on is the dithering. Right now, I have SGP doing that, but if I'm going to capture really short frames (5-10s), I think SharpCap might be better because SGP settles every frame even when not dithering, wasting a lot of time when you're doing very short exposures.

Posts: 2853
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

### Re: SharpCap 3.2 Beta now available

Thanks for the feedback - I will look into the folder monitor camera thing where it is not picking up new files.

I see your point on the wide monitor issue, but that may have to wait for a later version - I am already trying to get a double view option where the external monitor shows only the stacked image and the main monitor shows the controls *and* a smaller version of the image, but that is proving more troublesome than I expected.

cheers,

Robin

PilotAstronomy
Posts: 5
Joined: Thu Aug 02, 2018 10:40 pm

### Re: SharpCap 3.2 Beta now available

Robin,

Playing with it a bit, the real issue that makes it clunky is I can't "pin" the livestack settings window to anything but the bottom of the screen. If it could "pin" to the side of the Camera Control Panel window, it wouldn't be floating "on top" but rather would force the image view to be a fixed width of the SharpCap window minus the Camera Control Panel window minus the width of the Livestack window.

I realize the window settings w/ multimonitor, etc are difficult to code around. Just some feedback for maybe future versions!

Thanks for all you do.

Posts: 2853
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

### Re: SharpCap 3.2 Beta now available

PilotAstronomy wrote:
Mon Aug 06, 2018 5:48 pm
1) The "LiveStack" of a Folder Monitor Camera isn't entirely hands off. When I'm monitoring a folder but *NOT* LiveStacking it will play the newest frame in the view as intended, but when I am livestacking those frames as they come in, they do NOT get added to the stack. The best workaround I've come up with is to clear the LiveStack, resume it, and click the "Rewind and Replay All Frames" button. This effectively LiveStacks all my frames (skipping the first one, I think?)
Hi,

Just had a chance to test this out and it seems to work for me - I tested as follows

1) Create an empty folder
2) Choose folder monitor cameras, browse to the new empty folder and choose 'All in folder'
3) Enable live stacking (reset if already enabled)
4) Drop a single image file into the folder - the file becomes the first frame stacked
5) in the folder, copy the image file and then repeatedly paste it, making 'Image copy.png', 'Image Copy (2).png', etc - these files also get added to the stack with no further intervention needed.

This seems to work fine to me and is how I would expect it to work. If you can still make the problem you saw happen, please let me know how the steps to cause it differ from the above steps.

thanks,

Robin

### Who is online

Users browsing this forum: No registered users and 0 guests