Announcing HelioMaker: New Tool Built to Work with SharpCap Pro for Solar, Planetary, and Deep Sky Imaging

Anything that doesn't fit into any of the other forums
Post Reply
Eyeke2
Posts: 27
Joined: Thu Mar 14, 2024 4:08 pm

Announcing HelioMaker: New Tool Built to Work with SharpCap Pro for Solar, Planetary, and Deep Sky Imaging

#1

Post by Eyeke2 »

I’d like to share with the SharpCap community that a new tool called HelioMaker is now available. HelioMaker is designed to complement SharpCap Pro by bridging it with a custom version of PHD2 that includes solar and planetary detection capabilities.

Key highlights:
  • Single Camera and Telescope Guiding and Imaging
    HelioMaker allows using a single camera and telescope for both guiding and image capture. This can help streamline solar, lunar, and planetary imaging workflows by reducing equipment costs and setup complexity, removing the need for a dedicated solar guider.
  • Live Stack Support for Deep Sky Imaging
    HelioMaker introduces support for SharpCap Pro’s Live Stack feature, enabling guided deep sky imaging with a single camera and telescope, in combination with the custom PHD2 version.
  • Proven in Community Use
    The custom PHD2 version used with HelioMaker has been tested by a wide group of users. It has seen positive feedback across a range of use cases, including the recent Great American Solar Eclipse.
If this sounds like something that might fit your imaging setup or workflow, feel free to check it out. More information, including installation and usage instructions, is available on the HelioMaker website: https://www.heliomaker.com

Happy imaging.
Gfischer
Posts: 323
Joined: Thu Jun 22, 2023 4:20 pm

Re: Announcing HelioMaker: New Tool Built to Work with SharpCap Pro for Solar, Planetary, and Deep Sky Imaging

#2

Post by Gfischer »

I read the website for this program and it looks great for planetary. From what I read using it for livestack on dso is not part of program. I assume the long exposure used in dso livestack would not allow for adequate guidance moves.
Eyeke2
Posts: 27
Joined: Thu Mar 14, 2024 4:08 pm

Re: Announcing HelioMaker: New Tool Built to Work with SharpCap Pro for Solar, Planetary, and Deep Sky Imaging

#3

Post by Eyeke2 »

That is a very good point. The idea behind this integration with Live Stacking is to use short exposures in the range of a few seconds (typically 2 to 5 seconds). This exposure range allows guiding to continue while Live Stacking runs continuously in SharpCap Pro.

Of course, many DSO imagers prefer traditional long-exposure stacking. However, for those who enjoy experimenting with lucky imaging techniques,
this new option may be worth exploring. It provides a way to combine guiding and stacking with a single camera and telescope, reducing setup complexity.

SharpCap’s FWHM filtering and other stacking options help select the sharpest frames, improving the final image quality even with these shorter exposures. While this may not fully replace long-exposure, deep-sky workflows for faint objects, it offers a practical balance between guiding and stacking.
User avatar
admin
Site Admin
Posts: 17584
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Announcing HelioMaker: New Tool Built to Work with SharpCap Pro for Solar, Planetary, and Deep Sky Imaging

#4

Post by admin »

Hi,

thanks for making an announcement here - it's great to have other software like this that complements SharpCap and opens up new opportunities for imaging.

cheers,

Robin
saguaro
Posts: 70
Joined: Tue Feb 14, 2017 9:04 pm

Re: Announcing HelioMaker: New Tool Built to Work with SharpCap Pro for Solar, Planetary, and Deep Sky Imaging

#5

Post by saguaro »

I’ve been using SharpCap’s Feature Tracking tool for guiding during solar imaging. Can you please provide details about the advantages of using this tool versus SharpCap Feature Tracking? Thanks.
Eyeke2
Posts: 27
Joined: Thu Mar 14, 2024 4:08 pm

Re: Announcing HelioMaker: New Tool Built to Work with SharpCap Pro for Solar, Planetary, and Deep Sky Imaging

#6

Post by Eyeke2 »

saguaro wrote: Mon May 19, 2025 1:56 pm I’ve been using SharpCap’s Feature Tracking tool for guiding during solar imaging. Can you please provide details about the advantages of using this tool versus SharpCap Feature Tracking? Thanks.
The best answer really depends on whether you are satisfied with your current setup.

Personally, I ended up developing HelioMaker out of frustration with other solutions that just did not provide reliable tracking for me. Finding a dedicated solar guider was also difficult and expensive.

HelioMaker builds on the guiding capabilities of PHD2 and goes further by supporting not only solar disk tracking, but also lunar surface features, eclipse phases, crescents, and, thanks to recent improvements, practically all planets.

Another advantage is its ability to tolerate modest polar alignment errors, which can be helpful for remote setups or daytime imaging when achieving perfect polar alignment is more difficult.

Let me know if you'd like more technical details or have other questions.
Eyeke2
Posts: 27
Joined: Thu Mar 14, 2024 4:08 pm

Re: Announcing HelioMaker: New Tool Built to Work with SharpCap Pro for Solar, Planetary, and Deep Sky Imaging

#7

Post by Eyeke2 »

I have published a FAQ page on my website. Feel free to check it out here: HelioMaker FAQ Page

Reposting one of the questions from the FAQ:

How does HelioMaker differ from SharpCap’s Feature Tracking?

SharpCap Pro’s Feature Tracking can work for solar and planetary tracking in some scenarios. However, HelioMaker offers several advantages:
  • HelioMaker uses a custom version of PHD2 that provides a closed-loop guiding system, leveraging PHD2’s proven calibration process and a wide range of guiding algorithms. This makes it more reliable across different telescope mounts and setups.
  • HelioMaker supports guiding on full disks, crescents, planetary limbs, and surface features of solar system objects. This includes more difficult scenarios like eclipses, lunar phases, and changing solar surface activity.
  • HelioMaker allows you to use a single camera for both guiding and image or video capture, helping to reduce setup complexity and equipment cost.
  • PHD2 with HelioMaker is more tolerant of imperfect polar alignment, which is especially helpful for daytime or portable imaging sessions where perfect alignment can be difficult to achieve.
saguaro
Posts: 70
Joined: Tue Feb 14, 2017 9:04 pm

Re: Announcing HelioMaker: New Tool Built to Work with SharpCap Pro for Solar, Planetary, and Deep Sky Imaging

#8

Post by saguaro »

Thanks for the info. I would also really like to see a video tutorial walk-through of configuring and using HelioMaker along with SharpCap. Thanks.
jmesseroff
Posts: 2
Joined: Fri Sep 20, 2024 2:37 pm

Re: Announcing HelioMaker: New Tool Built to Work with SharpCap Pro for Solar, Planetary, and Deep Sky Imaging

#9

Post by jmesseroff »

I am having difficulty with setting green alignment on the limb of the Sun (partial disk) for PHD2 planetary and solar guiding.
And help would be appreciated.
Eyeke2
Posts: 27
Joined: Thu Mar 14, 2024 4:08 pm

Re: Announcing HelioMaker: New Tool Built to Work with SharpCap Pro for Solar, Planetary, and Deep Sky Imaging

#10

Post by Eyeke2 »

jmesseroff wrote: Fri Jul 25, 2025 5:06 pm I am having difficulty with setting green alignment on the limb of the Sun (partial disk) for PHD2 planetary and solar guiding.
And help would be appreciated.
I think you were trying to use Crescent or Full Disk detection while guiding on just a fraction of the solar disk - this mode won’t work in that case.
Instead, switch to Surface Features Detection and Tracking mode. It uses a completely different algorithm designed to lock onto local surface detail, which is what you need when only part of the disk is visible.
Regards,
Leo
Post Reply