Artefact on screen with Sharpcap but not Firecapture.

Anything that doesn't fit into any of the other forums
Post Reply
LaurenceT
Posts: 2
Joined: Mon Aug 01, 2022 7:32 am
Location: Camberley

Artefact on screen with Sharpcap but not Firecapture.

#1

Post by LaurenceT »

I set up last night to do some remote imaging of the moon which I haven't done for some time. For clarity this is the setup:

SkyMax127 Mak , Skywatcher autofocuser fitted with remote control unit powered by a Talentcell power brick, Asi224MC camera connected to a mini pc with a mini router wifi extender powered by Celestron Lithium LT Powerbank and an Az GTi mount. It all sounds a bit Heath Robinson I know but

normally it works very well. It enables me to sit indoors and connect to the mini pc via remote desktop on my laptop and control the mount with my iPad and the Mak focuser by remote control. I knew I was having trouble with focussing the Mak, it's probably that the little closed toothed timing belt that connects

the Skywatcher focuser to the Mak focus knob needs replacing as it has become slack. This is why the image is out of focus in the screenshots below but that's not the issue here. When I opened Sharpcap which is my usual choice there was a large artefact on the image which I couldn't undo, I opened Firecapture ( which I don't normally use)

and the there was no artefact.

I'd be grateful for any opinions, thanks for looking.

Image

Image
User avatar
admin
Site Admin
Posts: 17584
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Artefact on screen with Sharpcap but not Firecapture.

#2

Post by admin »

Hi,

I suspect that SharpCap was remembering some camera/processing setting from a previous session and was applying that setting when you opened the camera, causing the issue. I would suggest either looking through the camera settigns (particularly the 'Preprocessing' section) and setting things back to default/off, or opening the camera with the <CTRL> key pressed down, which will cause SharpCap to skip restoring the settings from the last session.

Hope this helps,

Robin
LaurenceT
Posts: 2
Joined: Mon Aug 01, 2022 7:32 am
Location: Camberley

Re: Artefact on screen with Sharpcap but not Firecapture.

#3

Post by LaurenceT »

Many thanks, I'll try that.
Post Reply