Confused as to best way to connect focuser

Anything that doesn't fit into any of the other forums
Post Reply
MycoAstro
Posts: 4
Joined: Fri Jan 31, 2025 11:40 am

Confused as to best way to connect focuser

#1

Post by MycoAstro »

I run two OTA setups, either a 190 Mak-Newt with Moonlite focuser for galaxies and PNs; or a 150mm f/2.8 Newtonian with a Rigel Systems focuser for nebulas and wide-field objects. Both focusers are controlled via the motor controller connection on my Pegasus Astro Ultimate Power Box v2. I have found two ways to connect to the focus motors (either the Moonlite or the Rigel Systems): select PegasusAstro Focuser 1 in the Hardware section of Settings in SharpCap, or select the Device Hub Focuser then select Properties and set it to PegasusAstro Focuser 1. Both methods seem to allow me to connect to my focus motors. Is one or the other a better and more stable way to connect?
User avatar
admin
Site Admin
Posts: 17584
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Confused as to best way to connect focuser

#2

Post by admin »

Hi,

essentially they are equivalent - the device hub option can help deal with limitations in the ASCOM drivers for some devices, but I don't think that the Pegasus drivers have any problems of that type, so the hub doesn't really bring much in your situation.

For reference, the device hub can help with

* Sharing access to an ASCOM driver to allow multiple applications to talk to it if the ASCOM driver itself doesn't support this
* Getting 32 bit only ASCOM drivers to work with a 64 bit application
* Acting as a potential workaround if an ASCOM driver misbehaves when running in a particular application.

cheers,

Robin
MycoAstro
Posts: 4
Joined: Fri Jan 31, 2025 11:40 am

Re: Confused as to best way to connect focuser

#3

Post by MycoAstro »

Thanks for the explanation.
Post Reply