Dear Robin,
I just received a QHY MInicam8C and tried to use with SharpCap.
After install and uninstall and reinstall I'm able to use it (QHYCCD_Win_AllInOne.24.12.27.10).
Cooling behavior is strange: power 0 but temperature decrease quickly to 7.5 °C and remain stable.
If I set 0°C it (too) quickly goes to 0°.
If I set 10°C starting from 0°C it do not work at all or sometimes increase slowly 1-2 °C
If I disconnect and reconnect the camera warming goes from 0°C to 5-6 °C. But I set 12 °C and air is 15 °C
Strange behavior
More I found also a new driver (QHYCamerasDriver-V25.01.13.1228-For-Windows10-NewIO) but if installed the camera do not appear anymore in the camera detected.
This is probably due to the (bugged) drivers. I am reporting this for your information
Best Regards
Fabio
QHY Minicam8C
- admin
- Site Admin
- Posts: 17584
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: QHY Minicam8C
Hi Fabio,
sorry to hear that you are having issues with the new Minicam - from the QHY downloads page, it looks like support for that camera was added in the 24.12.27.10 All-in-one, so that is probably the version to use for now. SharpCap (latest versions) already have a QHY SDK from 24.12.26, which I expect is the same as the one in the all-in-one pack. I can't find anything newer, so it looks like there is no current option to update the SDK in SharpCap to try to resolve any issues.
I have seen issues before where the cooler behaves oddly on some QHY cameras - sometimes it can fail to start or can stop unexpectedly when the camera changes mode. To avoid this, SharpCap tries resending the cooler target to the camera, but this is not always effective. You might be able to get some sort of workaround by changing the target temperature and then changing it back again (I have seen this help sometimes). Also, try turning the cooler into 'manual power' mode (untick the auto box on the cooler power), then put it back to auto - the idea is that changes like this may be sufficient to restart/reset the cooling control that is supposed to happen in the SDK and get it working again.
With the problem with the device being missing with the updated driver, it's possible that the driver update would require an updated SDK in SharpCap to match (but currently no sign of any updated version), or maybe just a bug in the new driver. Hopefully QHY will fix things either with a new driver update or a new SDK.
cheers,
Robin
sorry to hear that you are having issues with the new Minicam - from the QHY downloads page, it looks like support for that camera was added in the 24.12.27.10 All-in-one, so that is probably the version to use for now. SharpCap (latest versions) already have a QHY SDK from 24.12.26, which I expect is the same as the one in the all-in-one pack. I can't find anything newer, so it looks like there is no current option to update the SDK in SharpCap to try to resolve any issues.
I have seen issues before where the cooler behaves oddly on some QHY cameras - sometimes it can fail to start or can stop unexpectedly when the camera changes mode. To avoid this, SharpCap tries resending the cooler target to the camera, but this is not always effective. You might be able to get some sort of workaround by changing the target temperature and then changing it back again (I have seen this help sometimes). Also, try turning the cooler into 'manual power' mode (untick the auto box on the cooler power), then put it back to auto - the idea is that changes like this may be sufficient to restart/reset the cooling control that is supposed to happen in the SDK and get it working again.
With the problem with the device being missing with the updated driver, it's possible that the driver update would require an updated SDK in SharpCap to match (but currently no sign of any updated version), or maybe just a bug in the new driver. Hopefully QHY will fix things either with a new driver update or a new SDK.
cheers,
Robin
-
Fabioibirru
- Posts: 30
- Joined: Fri Sep 21, 2018 2:49 pm
Re: QHY Minicam8C
Hi robin,
thanks a lot for the tips
I found this "new" driver but didn't works.
No SKD update
QHYCCD Cameras Driver Updates (2025 Year)
2025.01.13
Update Note
1.miniCam8:Modified the cooler off default.
https://www.qhyccd.com/html/prepub/driv ... _driver.md
thanks a lot for the tips
I found this "new" driver but didn't works.
No SKD update
QHYCCD Cameras Driver Updates (2025 Year)
2025.01.13
Update Note
1.miniCam8:Modified the cooler off default.
https://www.qhyccd.com/html/prepub/driv ... _driver.md
-
Fabioibirru
- Posts: 30
- Joined: Fri Sep 21, 2018 2:49 pm
Re: QHY Minicam8C
Dear Robin,
FYI
I was able to install the last 2025 driver and all works as expected.
Best Regards
Fabio
FYI
I was able to install the last 2025 driver and all works as expected.
Best Regards
Fabio