Plate solving stopped working when changing computer.

Discussion of using SharpCap for Deep Sky Imaging
Post Reply
floki
Posts: 4
Joined: Mon Feb 20, 2023 8:22 pm

Plate solving stopped working when changing computer.

#1

Post by floki »

Hi everyone.
I've been using sharpcap pro for almost a year now and I managed to have my setup running flawlessly on my previous laptop. I recently changed my PC for a more recent one.

I've installed all the softwares I used to have, almost everything works fine, but unfortunately, I can't get the plate solving to work. I'm using ASPS : the stand-alone app successfully solved a few test pictures, but the "plate solve" function in sharp cap pro doesn't work correctly.
I keep having the surprising message : "Simplexy : 2 sources found" as if only 2 stars were detected on the image (sometimes 3 or 4, but not many more). With the exact same camera settings, on my older computer, hundreds of stars were detected.

And of course I double (triple, ...) - checked : gain (around 20000), exposure (+/- 5s), sigma (default value)... so yes, the images clearly show visible stars and no, i did not forget the cover on the scope ;) ...

Any idea what I may do wrong, specifically on this new computer ?

Thanks a lot, any help will be greatly appreciated.
User avatar
admin
Site Admin
Posts: 17580
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Plate solving stopped working when changing computer.

#2

Post by admin »

Hi,

in the plate solving settings in SharpCap there is a 'sigma' setting that controls how sensitive the star detection is in ASPS/Ansvr/Astrotortilla. The lower the value, the higher the sensitivity. Have a look to see if you had lowered that setting on your old PC, but haven't done so on the new one.

cheers,

Robin
floki
Posts: 4
Joined: Mon Feb 20, 2023 8:22 pm

Re: Plate solving stopped working when changing computer.

#3

Post by floki »

Thank you so much for your quick reply!
In fact the sigma value was set at "50" on the old PC, but was only "40" on the new one.... so I suppose, I should be able to find more sources...

I've just tested a minute ago : pressing the "test plate solving" button in the parameters window make both PCs behave exactly the same (which is, I guess, expected...)
But a bit earlier this evening I finally managed to plate solve one quickshot taken with my hypercam294C : for that I had to set gain to 72000 and exp. 8s, only to have 20-30 stars detected :shock: :shock: This is really weird ! Sometimes, even with such high gain/exp, too few stars are detected.

Anyway, I'll keep digging...
User avatar
admin
Site Admin
Posts: 17580
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Plate solving stopped working when changing computer.

#4

Post by admin »

Hi,

ok, not that then :)

How about the option to send 8 bit images to the plate solver (also in SharpCap plate solving settings). If you have faint stars then having that option on can cause them to be missed.

I would also suggest checking the images you are getting from the two laptops when capturing with the same settings look the same (save them as FITS, then you can have look at the values with FITSLiberator or similar software).

As you guessed, the test plate solving should produce the same results as it doesn't use an image from your camera, instead a sample image installed with SharpCap. That button is really to test that SharpCap can talk to the plate solver properly and that there are at least some index files installed.

cheers,

Robin
floki
Posts: 4
Joined: Mon Feb 20, 2023 8:22 pm

Re: Plate solving stopped working when changing computer.

#5

Post by floki »

I would also suggest checking the images you are getting from the two laptops when capturing with the same settings look the same (save them as FITS, then you can have look at the values with FITSLiberator or similar software).
I'll do that, thanks for the advice. (as soon as the weather allows it again :roll: ) I'll come back with the comparison.

Flo.
floki
Posts: 4
Joined: Mon Feb 20, 2023 8:22 pm

Re: Plate solving stopped working when changing computer.

#6

Post by floki »

Soooooo :oops:
I finally found the cause of my trouble : the option 'send 8-bit images to plate solver' was checked and this seems to drastically reduce the amount of stars that can be detected on the pictures.
Images shot on both PCs with the same settings looked exactly the same, so I had to check again (5th time ? 6th ??) the "plate solve" section of SharpCap Settings.

Unchecking the box solved it all. (Pun not intended)

Hope this will help anyone who runs into the same problem sometime ! :mrgreen:
User avatar
admin
Site Admin
Posts: 17580
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Plate solving stopped working when changing computer.

#7

Post by admin »

Hi,

glad you found it - that option will reduce the number of stars being detected (particularly faint ones), but there are some situations where the whole thing falls over from too many stars without it :(

clear skies!

Robin
Post Reply