Hi,
So I've been getting to grips with polar alignment.
Tonight, I got the best yet, really close to perfect.
Then, out of curiosity, I set my scope to the home position, took a shot, plate solved it, and sent the result to Stellarium. This is what I saw:
Polaris is only just about in the frame (the red outline).
Does this say anything about my polar alignment being good/bad? Or is it more about how I've set the home position? Or doesn't it really matter as long as I align my stars properly?
Also, related to polar alignment: if I slew horizontally, and the star I'm looking at on my screen goes across at a slight, non-horizontal angle (same for vertical - slewing vertically and star deviates from the vertical line), does this imply anything about my alignment, or more about whether the mount is level?
Thanks.
Polar alignment - should I see this?
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
-
- Posts: 23
- Joined: Thu Jun 06, 2019 4:58 pm
- admin
- Site Admin
- Posts: 13610
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Polar alignment - should I see this?
Hi,
it's not a problem – what it means is that your guide scope is offset by a degree or so from the RA axis when you're in the home position. The SharpCap polar alignment algorithm isn't sensitive to this misalignment and should still be giving you correct results.
The second thing you notice – that stars move at a slightly slanted angle when you move the telescope is all down to the rotation of your camera in the eyepiece holder. If you give the camera a tweak clockwise or anticlockwise by about 45° your see that they move at a completely different angle on screen but your polar alignment is completely unchanged.
Cheers, Robin
it's not a problem – what it means is that your guide scope is offset by a degree or so from the RA axis when you're in the home position. The SharpCap polar alignment algorithm isn't sensitive to this misalignment and should still be giving you correct results.
The second thing you notice – that stars move at a slightly slanted angle when you move the telescope is all down to the rotation of your camera in the eyepiece holder. If you give the camera a tweak clockwise or anticlockwise by about 45° your see that they move at a completely different angle on screen but your polar alignment is completely unchanged.
Cheers, Robin
-
- Posts: 23
- Joined: Thu Jun 06, 2019 4:58 pm
Re: Polar alignment - should I see this?
Thank you Robin - but I'm not actually guiding. This is from my camera. Does that make any difference?
- admin
- Site Admin
- Posts: 13610
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Polar alignment - should I see this?
Hi,
you mean from your main camera attached to your main telescope on the mount? In that case there are two possible causes – one is that your home position isn't quite at 90° declination – maybe it's about 89° or so. The other possibility is that you have a degree or so of cone error which is a misalignment between the optical axis of the telescope and the RA axis when the scope is in the home position (basically the telescope is either pointing a bit away from the RA axis or a bit towards it). Again neither of these should affect the accuracy of the polar alignment results, but fixing them might make your GOTOs more accurate.
Cheers, Robin
you mean from your main camera attached to your main telescope on the mount? In that case there are two possible causes – one is that your home position isn't quite at 90° declination – maybe it's about 89° or so. The other possibility is that you have a degree or so of cone error which is a misalignment between the optical axis of the telescope and the RA axis when the scope is in the home position (basically the telescope is either pointing a bit away from the RA axis or a bit towards it). Again neither of these should affect the accuracy of the polar alignment results, but fixing them might make your GOTOs more accurate.
Cheers, Robin
-
- Posts: 23
- Joined: Thu Jun 06, 2019 4:58 pm
Re: Polar alignment - should I see this?
Again, thank you so much Robin, you've been very helpful.
Time to crack open ConeSharp I think...!
Time to crack open ConeSharp I think...!