Page 1 of 1

Binning during PA

Posted: Mon Jul 09, 2018 9:09 pm
by epdreher
I downloaded and purchased the Pro version yesterday to hopefully replace my Polemaster procedure.

My guide scope has a 330mm FL. With a QHY5L-II, the FOV is approximate 0.83 x 0.62 degrees which, from what I've read, will work for polar alignment. My question:

If I bin at 2x2 which effectively doubles the FOV on both axes, does this actually translate to a wider FOV, making it easier to obtain the needed stars?

I'm living in thunderstorms right now and haven't had the chance to try the software yet, so I'm looking at all aspects.

Thanks for your answers.

Re: Binning during PA

Posted: Mon Jul 09, 2018 9:38 pm
by admin
Hi,

unfortunately binning doesn't increase the FOV of your camera - you just see the same area of sky at a lower resolution. It may help find stars because of the increased brightness (or reduced noise) that binning gets you.

Please send some of your thunderstorms this way - we have had no rain for weeks and could do with a good downpour!

cheers,

Robin

Re: Binning during PA

Posted: Mon Jul 09, 2018 10:45 pm
by epdreher
So the math isn't always correct when it comes to FOV calculators. ;)

As to the thunderstorms, you can have them. This is the worst six months we've seen as far as astro-skies are concerned. Even when there's no rain for weeks, the clouds just play havoc with our observing conditions.

Thank you.

Re: Binning during PA

Posted: Wed Jul 11, 2018 4:16 pm
by admin
What I thnk the FOV calculator may have missed is that if you bin 2x2 then you double the pixel size (say 3.75 to 7.5 micron) but you also halve the horizontal and vertical pixel count of the image (say 1280x960 to 640x480). The net effect is that the FOV stays exactly the same :)

cheers,

Robin