Page 1 of 1

Derotator and image issue

Posted: Sat Jul 18, 2026 3:45 pm
by Howardk
I am shooting in altaz with no guiding and use a derotator to derotate my subs

I am capturing ‘raw frames from the camera’ whilst live stacking and my frames after stacking in saspro show huge rotation as if my derotator wasn’t working…which it is!

Is this because i am capturing raw frames from the camera whilst live stacking?

If so… would i see much better derotated frames if i wasn’t live stacking and captured my subs from the start capture menu button?

Re: Derotator and image issue

Posted: Sun Jul 19, 2026 12:33 am
by Howardk
Its ok

I reversed the motor direction on my derotator and now all is good

But I would like to know if there is any difference in saving subs ‘raw from camera’ while live stacking compared with using the ‘start capture’ command

Re: Derotator and image issue

Posted: Mon Jul 20, 2026 12:17 pm
by admin
Hi,

the only difference is whether SharpCap will apply any selected pre-processing steps to the image before saving (things like dark, flat, etc)

* If saving RAW frames from deep sky live stacking then the pre-processing is *NOT* applied to the saved frames
* If capturing from 'Start Capture' or 'Quick Capture' or 'Snapshot' then the selected pre-processing is applied

cheers,

Robin

Re: Derotator and image issue

Posted: Mon Jul 20, 2026 2:44 pm
by Howardk
Thanks Robin