I am not able to make SharpCap Pro v4.1 see QHY183M. I have tried running the QHYCCD_Win_AllInOne.24.12.27.10 several times, but still, no luck. What am I missing? Please help. I am doing it on a Dell running Windows-11 Home on an Intel Core Ultra i9 with 32GB of RAM and 1TB SSD.
Thanks
QHY183M is not recognized
- admin
- Site Admin
- Posts: 17573
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: QHY183M is not recognized
Hi,
Lets see, the steps would be...
* Install QHY USB system driver from the 'all in one' (that's all you need)
* Plug in with USB cable, supply 12V power to the camera if it needs it (some cameras do not show up without 12V power)
* Open Windows 'Device Manager' for QHY cameras there should be a category showing called 'Astroimaging Equipment' with the camera inside it - check that there is no error/warning icon over the camera. If you can't see the camera in device manager or it has an error/warning icon then there is a driver and/or hardware issue
* Once showing OK in device manager, run SharpCap. Sometimes detecting certain brands of camera can be slow and a 'rescan for cameras' can help
cheers,
Robin
Lets see, the steps would be...
* Install QHY USB system driver from the 'all in one' (that's all you need)
* Plug in with USB cable, supply 12V power to the camera if it needs it (some cameras do not show up without 12V power)
* Open Windows 'Device Manager' for QHY cameras there should be a category showing called 'Astroimaging Equipment' with the camera inside it - check that there is no error/warning icon over the camera. If you can't see the camera in device manager or it has an error/warning icon then there is a driver and/or hardware issue
* Once showing OK in device manager, run SharpCap. Sometimes detecting certain brands of camera can be slow and a 'rescan for cameras' can help
cheers,
Robin
Re: QHY183M is not recognized
Hi Robin,
Thanks. I did all that. When I plug in the USB cable (along with 12V dc), all I see is a pop-up showing a new WestBridge device under the "Other Devices" group (please see attached screenshot). No new USB port or Astroimaging Equipment.
It was working fine with my old computer.
Please help,
Thanks
-Prasad
Thanks. I did all that. When I plug in the USB cable (along with 12V dc), all I see is a pop-up showing a new WestBridge device under the "Other Devices" group (please see attached screenshot). No new USB port or Astroimaging Equipment.
It was working fine with my old computer.
Please help,
Thanks
-Prasad
- Attachments
-
- Screenshot 2026-08-16 170225.jpg (46.43 KiB) Viewed 1018 times
Re: QHY183M is not recognized
It is working now. I reinstalled the driver after checking the "QHY5III" box. That did the trick. Waiting for the weather to clear.
Thanks
-Prasad
Thanks
-Prasad