I want to shoot some 15 second exposure unguided frames but need to dither. I usually shoot 4 of the 15 second frames then do a dither, then 4 more and so on.
With no guiding I have to create my dither and was wondering if the "Offset the mount position by RA=<Right Ascension Offset>, Dec=<Declination Offset>" would do the trick, or is there a way to do this with PHD2 in combination with Sharpcap?
Since I will be running it unattended using the hand controller to dither is not an option.
Thanks for your help
Is it possible to create a manual dither?
- admin
- Site Admin
- Posts: 17574
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Is it possible to create a manual dither?
Hi,
if you are not using PHD2 to guide but still want to dither, then the best bet is to set SharpCap up in the 'Guiding Settings' page to use 'dither only' guiding. In this mode there is no real guiding, but SharpCap can request a dither via either the sequencer or deep sky live stacking, and that will generate a mount movement using random movement values via the 'Pulse Guiding' ASCOM functionality.
Once the settings are adjusted to 'dither only' guiding and you specify a maximum dither size in the same settings page, you will need a 'Monitor Guiding Application' step at the start of your sequence to initialize the connection from the sequence to the 'guiding application' and 'request a single dither' steps between frames as required.
cheers,
Robin
if you are not using PHD2 to guide but still want to dither, then the best bet is to set SharpCap up in the 'Guiding Settings' page to use 'dither only' guiding. In this mode there is no real guiding, but SharpCap can request a dither via either the sequencer or deep sky live stacking, and that will generate a mount movement using random movement values via the 'Pulse Guiding' ASCOM functionality.
Once the settings are adjusted to 'dither only' guiding and you specify a maximum dither size in the same settings page, you will need a 'Monitor Guiding Application' step at the start of your sequence to initialize the connection from the sequence to the 'guiding application' and 'request a single dither' steps between frames as required.
cheers,
Robin