Page 1 of 1

Saving after live stacking

Posted: Tue Nov 18, 2025 2:47 pm
by Howardk
Hi

Can i save my RAW image after i have live stacked with dark frane and flat field subtraction already done in RAW so i can quickly post process for a pretty picture?

The manual says you cannot save with the dark and flatfield already applied whilst live stacking

Re: Saving after live stacking

Posted: Tue Nov 18, 2025 3:13 pm
by admin
Hi,

no, it deliberately doesn't work that way... The raw frames from live stacking are saved entirely unprocessed (just as they came from the camera) so that you can do a full reprocess later if that's the way you like to work. The idea is that you save the actual stacked image from live stacking for the 'quick pretty picture' if that's what you want.

cheers,

Robin

Re: Saving after live stacking

Posted: Tue Nov 18, 2025 4:13 pm
by Howardk
Hi Robin

So can i save the live stacked image without the dark and flatfield as a RAW image?

Re: Saving after live stacking

Posted: Wed Nov 19, 2025 10:52 am
by admin
Hi,

you can save the live stacked image, but it is in no way 'RAW'... It has dark and flat correction applied to each frame before adding to the stack, the frames are also debayered from RAW to full colour before adding them to the stack (this is necessary for alignment to work), and so on... So, what you get is a saved RGB image of the stack. Depending on which save option you choose, this can either be the stack data itself (no stretch or other processing applied) or the image as seen on the screen with stretching and potentially other processing.

cheers,

Robin

Re: Saving after live stacking

Posted: Wed Nov 19, 2025 1:28 pm
by Howardk
Ok

Will experiment

Thanku