Page 1 of 1
AT60ED and 4k IMX415 USB Camera Backfocus?
Posted: Tue Oct 28, 2025 6:24 pm
by DaveE
Hello
I recently posted about using a USB Camera with Sharpcap and it appeared the specs show it will.
https://www.aliexpress.us/item/32568071 ... pt=glo2usa
I expect it's a backfocus thing and please bear with my ignorance. I just can't get this into focus. Have tried with/without the field flattener reducer.
What would be the train I should use?
Appreciated.
Re: AT60ED and 4k IMX415 USB Camera Backfocus?
Posted: Tue Oct 28, 2025 7:14 pm
by turfpit
Dave
What is the field flattener you are using? The back focus should be specified in the field flattener specs. 55mm is a common value - the distance from the back of the flattener to the camera sensor. A link to the device would help.
The backfocus will be different if just the scope is used. For example, I have a Vixen 81s refractor which has a backfocus of 140mm. If I fit a Vixen 0.67x reducer/flattener then the backfocus becomes 63.5mm.
Dave
Re: AT60ED and 4k IMX415 USB Camera Backfocus?
Posted: Tue Oct 28, 2025 7:24 pm
by DaveE
Thanks
It's the one that's designed for the scope.
https://astronomics.com/products/astro- ... eq=uniform
If I have to purchase anything is it wise to go for a kit of some sort?
I'm thinking of something like this?
https://www.amazon.com/SVBONY-Extension ... QF1H&psc=1
Re: AT60ED and 4k IMX415 USB Camera Backfocus?
Posted: Tue Oct 28, 2025 8:49 pm
by turfpit
Dave
From the link
The Astro-Tech ATRF60 reducer/flattener threads on the 60ED focusers. The flattener is threaded for attachment to the telescope via a 54mm metric thread. The camera side of the reducer has 48mm T-threads to connect to a T-ring and camera body. Back focus is 55mm from the shoulder of the reducer to the image plane, the standard spacing for 35mm and DSLR camera bodies.
The back focus is 55mm. Look up the camera specs and try to establish how far back the sensor is set, or ask the manufacturer. Subtract this value from 55 and the answer is the amount of T spacers you need.
As part of the spacing distance you will need to allow for conversion from the camera to the 48mm T threads.
Dave
Re: AT60ED and 4k IMX415 USB Camera Backfocus?
Posted: Wed Oct 29, 2025 1:14 pm
by admin
Hi,
a good trick for puzzling issues with focus position is to take off the camera, point the telescope out of the window at the scenery outside and use a white piece of paper/card to try to get an image projected through the telescope onto the paper/card. When you get the image into focus on the paper, the paper is in the position where the camera sensor needs to go (give or take a little bit to allow for the difference between infinity focus for the stars and a nearer focus for terrestrial scenes).
cheers,
Robin
Re: AT60ED and 4k IMX415 USB Camera Backfocus?
Posted: Wed Oct 29, 2025 1:44 pm
by turfpit
That’s a good one Robin.
When I have new equipment to trial, I work from inside in an upstairs bedroom. There is a mobile mast about 1 mile away that I use as a target. A comfortable way to get things working. I got wise to fumbling around in the cold and dark whilst wasting good sky time.
Dave
Re: AT60ED and 4k IMX415 USB Camera Backfocus?
Posted: Wed Oct 29, 2025 3:45 pm
by turfpit
Dave
This might be useful.
https://www.cloudynights.com/forums/to ... 15-for-52/
[edit: at a guess, you are already posting on the thread?]
Dave
Re: AT60ED and 4k IMX415 USB Camera Backfocus?
Posted: Wed Oct 29, 2025 10:45 pm
by DaveE
Thanks All
I got frustrated, then remembered I had the field flattener in the box to get the name off it.
On redoing, with the scope inside but looking at hills a few miles away, I had a pretty good pic of a wasp buzzing round. I think this is with a Barlow attached. So I'm nearer and will try again tomorrow plus the tips.
Edit: Re the cloudy nights link, this is where I got the idea of the camera from.
Re: AT60ED and 4k IMX415 USB Camera Backfocus?
Posted: Thu Oct 30, 2025 7:46 am
by turfpit
You will need a c-mount to T adapter then appropriate T spacers or a 1.25” to to T adapter plus spacers if you have both parts in your CN links. Can be found on Amazon or eBay.
Usual story - camera $30, bits to get it working $100.
Good luck with the project.
Dave
Re: AT60ED and 4k IMX415 USB Camera Backfocus?
Posted: Thu Oct 30, 2025 2:29 pm
by DaveE
Yeah, I get you.
Adapter (C Mount) should be here today and I'm looking at spacers. Foggy here in Spokane - can't tell the difference
