Neximage 10 issues

User avatar
admin
Site Admin
Posts: 1740
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Neximage 10 issues

Post by admin » Sat Jun 09, 2018 2:26 pm

Please can you try installing the Celestron/Imaging Source SDK from this link and then try again?

https://dl.theimagingsource.com/350fe51 ... 58f649c2c/

For me, on a clean machine, the camera DLLs for the Celestron camera will not load until I install this (although I can't quite work out why yet). Just let it run through on the default install settings.

I am also going to put out a new build in the next few days that will try to improve logging around why certain camera dlls fail to load.

cheers,

Robin

jofishr
Posts: 4
Joined: Sun Jun 03, 2018 3:28 pm

Re: Neximage 10 issues

Post by jofishr » Fri Jun 15, 2018 3:28 am

Info: 20:25:37.4599372 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: SharpCap Version 3.1.5203.0
Info: 20:25:37.4609294 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: GC Memory 116Mb
Info: 20:25:37.4644013 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Process Memory 147Mb
Info: 20:25:37.4644013 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Total Physical Memory 8061Mb
Info: 20:25:37.4644013 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Available Physical Memory 4493Mb
Info: 20:25:37.4644013 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Operating System : Microsoft Windows NT 6.2.9200.0
Debug: 20:25:37.5601313 Thread:#1 SharpCap.UI.SharpCapForm..ctor() :: Started
Info: 20:25:37.8007221 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type BaslerDeviceEnumerator
Info: 20:25:37.8007221 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type QHYDeviceEnumerator
Info: 20:25:37.8007221 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type ASIDeviceEnumerator
Info: 20:25:37.8007221 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type AltairDeviceEnumerator
Warning: 20:25:37.8666851 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Could not load capture provider - SharpCap.Cameras.PointGrey.PointGreyDeviceEnumerator - System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.IO.FileNotFoundException: Could not load file or assembly 'FlyCapture2Managed_v140.dll' or one of its dependencies. The specified module could not be found.
at SharpCap.Cameras.PointGrey.PointGreyDeviceEnumerator..ctor()
--- End of inner exception stack trace ---
at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
at System.Activator.CreateInstance[T]()
at SharpCap.MultiCaptureProvider.AddProvider[T]() in C:\Documents\Source Code\SharpCap3.1\src\SharpCap\Models\MultiCaptureProvider.cs:line 510
Info: 20:25:37.8666851 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type SxDeviceEnumerator
Info: 20:25:37.8696646 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.Altair.dll
Info: 20:25:37.8706553 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.ASCOMCamera.dll
Info: 20:25:37.8711518 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.ASI.dll
Info: 20:25:37.8711518 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.Basler.dll
Info: 20:25:37.8716480 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.Celestron.dll
Info: 20:25:37.8909918 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.DS3.dll
Info: 20:25:37.8914887 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.Fake.dll
Info: 20:25:37.8914887 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.INova.dll
Info: 20:25:37.9253332 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.NewDirectShow.dll
Info: 20:25:37.9258290 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.PointGrey.dll
Info: 20:25:37.9258290 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.QHY.dll
Info: 20:25:37.9263247 Thread:#1 SharpCap.MultiCaptureProvider.AddProvidersByReflection(String[] providerNames) :: Added device enumerator of type CelestronDeviceEnumerator
Info: 20:25:37.9263247 Thread:#1 SharpCap.MultiCaptureProvider.AddProvidersByReflection(String[] providerNames) :: Added device enumerator of type iNovaDeviceEnumerator
Info: 20:25:37.9263247 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type DS3DeviceEnumerator
Info: 20:25:37.9267891 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type AscomDeviceEnumerator
Info: 20:25:37.9267891 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type FakeDeviceEnumerator
Warning: 20:25:37.9977170 Thread:#1 SharpCap.Base.Utilities.Logger.Warn(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Exception from Failed to loaded Hardware Proxy assembly SharpCap.WheelProxy.ASCOM.dll because : RegistryAccess.New - Unexpected exception : RegistryAccess.New - Unexpected exception
Warning: 20:25:37.9977170 Thread:#1 SharpCap.Base.Utilities.Logger.Warn(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Inner Exception : ASCOM.Utilities.Exceptions.ProfilePersistenceException: OpenSubKey: Exception encountered opening key - Result: 0x5
at ASCOM.Utilities.RegistryAccess.OpenSubKey(RegistryKey ParentKey, String SubKeyName, Boolean Writeable, RegWow64Options Options)
at ASCOM.Utilities.RegistryAccess.NewCode(Boolean p_IgnoreChecks)
Warning: 20:25:38.1573242 Thread:#1 SharpCap.Base.Utilities.Logger.Warn(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Exception of type TargetInvocationException from Failed to loaded FocuserProxy assembly Sharpcap.FocuserProxy.ASCOM.dll because : Exception has been thrown by the target of an invocation. : Exception has been thrown by the target of an invocation.
Stack Trace: at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.Activator.CreateInstance(Type type)
at SharpCap.FocuserFinder.LoadFocusers(Type t) in C:\Documents\Source Code\SharpCap3.1\src\SharpCap\Utils\FocuserFinder.cs:line 116
at SharpCap.FocuserFinder.TryLoadFocuserProxy(FileInfo fi) in C:\Documents\Source Code\SharpCap3.1\src\SharpCap\Utils\FocuserFinder.cs:line 99
Warning: 20:25:38.1593084 Thread:#1 SharpCap.Base.Utilities.Logger.Warn(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Inner Exception : ASCOM.Utilities.Exceptions.ProfilePersistenceException: RegistryAccess.New - Unexpected exception ---> ASCOM.Utilities.Exceptions.ProfilePersistenceException: OpenSubKey: Exception encountered opening key - Result: 0x5
at ASCOM.Utilities.RegistryAccess.OpenSubKey(RegistryKey ParentKey, String SubKeyName, Boolean Writeable, RegWow64Options Options)
at ASCOM.Utilities.RegistryAccess.NewCode(Boolean p_IgnoreChecks)
--- End of inner exception stack trace ---
at ASCOM.Utilities.RegistryAccess.NewCode(Boolean p_IgnoreChecks)
at ASCOM.Utilities.RegistryAccess..ctor(String p_CallingComponent)
at ASCOM.Utilities.Profile..ctor()
at Sharpcap.FocuserProxy.ASCOM.Factory..ctor() in C:\Documents\Source Code\SharpCap3.1\src\Sharpcap.FocuserProxy.ASCOM\Factory.cs:line 44
Warning: 20:25:38.1593084 Thread:#1 SharpCap.Base.Utilities.Logger.Warn(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Inner Exception : ASCOM.Utilities.Exceptions.ProfilePersistenceException: OpenSubKey: Exception encountered opening key - Result: 0x5
at ASCOM.Utilities.RegistryAccess.OpenSubKey(RegistryKey ParentKey, String SubKeyName, Boolean Writeable, RegWow64Options Options)
at ASCOM.Utilities.RegistryAccess.NewCode(Boolean p_IgnoreChecks)
Warning: 20:25:38.1851002 Thread:#1 SharpCap.Base.Utilities.Logger.Warn(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Exception from Failed to loaded Hardware Proxy assembly SharpCap.MountProxy.ASCOM.dll because : RegistryAccess.New - Unexpected exception : RegistryAccess.New - Unexpected exception
Warning: 20:25:38.1851002 Thread:#1 SharpCap.Base.Utilities.Logger.Warn(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Inner Exception : ASCOM.Utilities.Exceptions.ProfilePersistenceException: OpenSubKey: Exception encountered opening key - Result: 0x5
at ASCOM.Utilities.RegistryAccess.OpenSubKey(RegistryKey ParentKey, String SubKeyName, Boolean Writeable, RegWow64Options Options)
at ASCOM.Utilities.RegistryAccess.NewCode(Boolean p_IgnoreChecks)

Info: 20:25:38.5878593 Thread:#1 SharpCap.Base.Utilities.Logger.LogStackTrace(LogLevel level, String msg) :: Parent being changed on PreviewPanel
at SharpCap.UI.ScrollZoomForm.OnParentChanged(Object sender, EventArgs eventArgs)
at System.EventHandler.Invoke(Object sender, EventArgs e)
Debug: 20:25:38.6260516 Thread:#1 SharpCap.UI.SharpCapForm..ctor() :: Ended
Info: 20:25:38.7054104 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: CPU : Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz with 4 cores.
Debug: 20:25:38.7361625 Thread:#1 SharpCap.UI.SharpCapForm.SharpCapForm_Load(Object sender, EventArgs e) :: Started
Debug: 20:25:38.7371574 Thread:#1 SharpCap.UI.SharpCapForm.SharpCapForm_Load(Object sender, EventArgs e) :: Ended
Debug: 20:25:38.7579859 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Started
Debug: 20:25:38.7798120 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Timebomb checked
Debug: 20:25:38.7872500 Thread:#1 SharpCap.Cameras.Basler.BaslerDeviceEnumerator.GetDevices() :: Started
Info: 20:25:38.8527221 Thread:#7 SharpCap.Base.SimpleDeviceEnumerator.GetDevices(Func`1 deviceNameFinder, String infoText, Func`2 fullNameToDispayName, Func`3 tagCreatorFunc) :: FindCameras - found 0 cameras
Debug: 20:25:38.9286098 Thread:#1 SharpCap.Cameras.Basler.BaslerDeviceEnumerator.GetDevices() :: Ended
Error: 20:25:39.0441779 Thread:#15 SharpCap.Base.Utilities.Logger.Error(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Exception of type ProfilePersistenceException from Getting ASCOM cameras : RegistryAccess.New - Unexpected exception
Stack Trace: at ASCOM.Utilities.RegistryAccess.NewCode(Boolean p_IgnoreChecks)
at ASCOM.Utilities.RegistryAccess..ctor(String p_CallingComponent)
at ASCOM.Utilities.Profile..ctor()
at SharpCap.Cameras.ASCOM.AscomDeviceEnumerator.GetDevices() in C:\Documents\Source Code\SharpCap3.1\src\SharpCap.Cameras.ASCOM\AscomDeviceEnumerator.cs:line 26
Error: 20:25:39.0441779 Thread:#15 SharpCap.Base.Utilities.Logger.Error(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Inner Exception : ASCOM.Utilities.Exceptions.ProfilePersistenceException: OpenSubKey: Exception encountered opening key - Result: 0x5
at ASCOM.Utilities.RegistryAccess.OpenSubKey(RegistryKey ParentKey, String SubKeyName, Boolean Writeable, RegWow64Options Options)
at ASCOM.Utilities.RegistryAccess.NewCode(Boolean p_IgnoreChecks)
Debug: 20:25:39.0446741 Thread:#15 SharpCap.Cameras.Fake.FakeDeviceEnumerator.GetDevices() :: Started
Debug: 20:25:39.0446741 Thread:#15 SharpCap.Cameras.Fake.FakeDeviceEnumerator.GetDevices() :: Ended
Info: 20:25:39.0451698 Thread:#15 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Test Camera 1 (Deep Sky) (Test Cameras)
Info: 20:25:39.0451698 Thread:#15 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Test Camera 2 (High Speed) (Test Cameras)
Info: 20:25:39.1949622 Thread:#1 SharpCap.Base.SimpleDeviceEnumerator.GetDevices(Func`1 deviceNameFinder, String infoText, Func`2 fullNameToDispayName, Func`3 tagCreatorFunc) :: QHYCameraFinder - found 0 cameras
Info: 20:25:39.3105299 Thread:#7 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: QHYCCD Camera(WDM) (DirectShow Cameras)
Info: 20:25:39.3105299 Thread:#7 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Integrated Webcam (DirectShow Cameras)
Info: 20:25:39.3105299 Thread:#7 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: NexImage 5 (DirectShow Cameras)
Info: 20:25:39.3105299 Thread:#7 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: QHY Camera (Native WDM) (DirectShow Cameras)
Debug: 20:25:39.4148816 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Docking setup
Debug: 20:25:39.4154143 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Startup scripts (if any) run
Debug: 20:25:39.4173861 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Menu updated
Debug: 20:25:39.4552325 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Splash and tips done
Debug: 20:25:39.4869368 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Ended
Info: 20:25:51.6191755 Thread:#1 SharpCap.Models.Application+<>c__DisplayClass35_0.<set_SelectedCamera>b__0() :: Changing camera from none to NexImage 5
Info: 20:25:51.6499268 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: OpeningDevice event received in UI thread
Debug: 20:25:51.6573693 Thread:#1 SharpCap.MultiCaptureProvider.OpenDevice(DeviceTagData deviceTag) :: Opening device : NexImage 5 (via DirectShow Cameras)
Info: 20:25:51.6623288 Thread:#1 SharpCap.Base.CaptureProviderBase`1.OpenDevice(DeviceTagData dtd) :: Started
Debug: 20:25:51.6628250 Thread:#1 SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd) :: Started
Warning: 20:25:51.7044231 Thread:#1 SharpCap.Base.Utilities.Logger.Warn(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Exception of type UnauthorizedAccessException from No access to NexImage 5 : Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Stack Trace: at System.Runtime.InteropServices.ComTypes.IMoniker.BindToObject(IBindCtx pbc, IMoniker pmkToLeft, Guid& riidResult, Object& ppvResult)
at SharpCap.Cameras.NewDirectShow.DeviceEnumerator`1.GetCaptureFilter(String devicePath) in C:\Documents\Source Code\SharpCap3.1\src\SharpCap.Cameras.NewDirectShow\DeviceEnumerator.cs:line 68
at SharpCap.Cameras.DS3.DS3CameraProxy..ctor(DeviceTagData dtd) in C:\Documents\Source Code\SharpCap3.1\src\SharpCap.Cameras.DS3\DS3CameraProxy.cs:line 71
at SharpCap.Cameras.DS3.DS3CaptureProvider.BuildCameraProxy(DeviceTagData dtd) in C:\Documents\Source Code\SharpCap3.1\src\SharpCap.Cameras.DS3\DS3CaptureProvider.cs:line 26
at SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd) in C:\Documents\Source Code\SharpCap3.1\src\SharpCap.Base\SimpleCaptureProvider.cs:line 46
at SharpCap.Base.CaptureProviderBase`1.OpenDevice(DeviceTagData dtd) in C:\Documents\Source Code\SharpCap3.1\src\SharpCap.Base\CaptureProviderBase.cs:line 933
at SharpCap.MultiCaptureProvider.OpenDevice(DeviceTagData deviceTag) in C:\Documents\Source Code\SharpCap3.1\src\SharpCap\Models\MultiCaptureProvider.cs:line 291
at SharpCap.Models.Camera.OpenDevice() in C:\Documents\Source Code\SharpCap3.1\src\SharpCap\Models\Camera.cs:line 871
Debug: 20:25:59.1176990 Thread:#1 SharpCap.PythonScripting.ShowConsole() :: Started

User avatar
admin
Site Admin
Posts: 1740
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Neximage 10 issues

Post by admin » Fri Jun 15, 2018 6:30 pm

Ok, here's a suggestion...

Go to the Windows Privacy settings, go to the 'Camera' section and make sure that 'Allow apps access to your camera' is on.

The error at the end of the log is what I have seen with the latest Windows update if that option is turned off. That should fix the problem of opening the camera under DirectShow. It may be that the same setting is also preventing the camera from showing up under it's direct connection option too.

cheers,

Robin

jofishr
Posts: 4
Joined: Sun Jun 03, 2018 3:28 pm

Re: Neximage 10 issues

Post by jofishr » Mon Jun 18, 2018 9:36 pm

Robin I reset my Dell laptop and told it to "remove everything"
Camera work perfect now. Thanks for your attention to this

I did lose my recently purchased license is there a way to get it back?

User avatar
admin
Site Admin
Posts: 1740
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Neximage 10 issues

Post by admin » Mon Jun 18, 2018 9:38 pm

Sorry to hear that you had to go to that lengths, but good that it's working now.

You should have received a copy of your license by email - if you haven't got that email then you can get it resent to you by entering the email address you used to buy the license on this page - https://store.astrosharp.co.uk/Recovery

If that doesn't work then let me know.

cheers,

Robin

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests