Patterning effects in SER files of the moon?
Posted: Mon May 05, 2025 12:32 pm
Does anyone have an explanation for why my lunar images (below) were dominated by stripy patterning effects when I tried using an ASI 294 MM mono camera to capture SER files of the moon?
In 46 Mb 'unlocked' mode the pixel size of the camera is 2.3 um. The telescope was an OO (UK) VX12 F4 300 mm Newtonian with a 2X Barlow. Thus with this set up the image scale was 0.25 arcsec/ pixel.
A 3500 frame .SER file was captured as below in SC4.1 at 23 fps – the histogram looked about right at 11 ms and gain 121.
The best quality 30% of frames were stacked in AS 3! and processed in Registax and/ or PixInsight. However all attempts at sharpening just seemed to enhance a stripy background grid pattern …. It became evident that however I tried processing the file (e.g. via PIPP and conversion to AVI) exactly the same patterning effect was observed. This was true also when processing the ser file via the SC4.1 live stacking tool and using the sharpening tools therein.
I am wondering whether this might be a problem with the ASI294 MM camera because there was no such effect using an ASI 715MC OSC (1.45 um pixel) camera and capturing RAW8 files. Or did I make some error in capture settings (below)?
Images show images of the central peak in Theophilus --- mono8 with the ASI294 MM camera and one (not brilliantly focused) with the ASI 715MC.
Any help or suggestions appreciated
---------------------------------------------------------
[ZWO ASI294MM Pro]
CameraSerialNumber=1D06570E17000900
FrameType=Light
Pan=3492
Tilt=2304
Output Format=SER file (*.ser)
Binning=1
Resolution=1280x1024
Read Mode=46 Megapixel
Colour Space=MONO8
Exposure/Gain Shift=0
High Speed Mode=On
Turbo USB=80(Auto)
Flip=None
Frame Rate Limit=Maximum
Gain=121
Exposure=10.9450ms
Timestamp Frames=Off
Brightness=10
Cooler Power=0
Temperature=15.1
Target Temperature=-5
Cooler=Off
Auto Exp Max Gain=350
Auto Exp Max Exp MS=30000
Auto Exp Target Brightness=100
CA Reduction/Synthetic Blue=Off
Mask over exposed pixels=Off
Flip (after dark/flat)=None
Trail Width=3
Minimum Trail Length=100
Trail Detection Sensitivity=9
Remove Satellite Trails=Off
Background Subtraction=Off
Planet/Disk Stabilization=Off
Banding Threshold=10
Banding Suppression=0
Apply Flat=None
Dark Scaling (Experimental)=Off
Hot Pixel Sensitivity=5
Subtract Dark=None
DisplayStretchEnable=1
NegativeDisplay=0
Display Black Point=0
Display MidTone Point=0.5245353968549946
Display White Point=1
Notes=
Pegasus Astro Focus Controller=72370
Focuser Temperature=9.75
iOptron CEM120,70,40,26, GEM, HEM, HAE, HAZ series and SkyHunter Mount=RA=08:33:32.5,Dec=+22:25:20 (JNOW)
TimeStamp=2025-05-03T21:07:56.1709157Z
SharpCapVersion=4.1.12946.0
StartCapture=2025-05-03T21:07:56.1604761Z
MidCapture=2025-05-03T21:09:11.2845462Z
EndCapture=2025-05-03T21:10:26.4086163Z
JDStartCapture=2460799.380511
JDMidCapture=2460799.381381
JDEndCapture=2460799.382250
Duration=150.248s
FrameCount=3534
ActualFrameRate=23.5211fps
TimeZone=+1.00
In 46 Mb 'unlocked' mode the pixel size of the camera is 2.3 um. The telescope was an OO (UK) VX12 F4 300 mm Newtonian with a 2X Barlow. Thus with this set up the image scale was 0.25 arcsec/ pixel.
A 3500 frame .SER file was captured as below in SC4.1 at 23 fps – the histogram looked about right at 11 ms and gain 121.
The best quality 30% of frames were stacked in AS 3! and processed in Registax and/ or PixInsight. However all attempts at sharpening just seemed to enhance a stripy background grid pattern …. It became evident that however I tried processing the file (e.g. via PIPP and conversion to AVI) exactly the same patterning effect was observed. This was true also when processing the ser file via the SC4.1 live stacking tool and using the sharpening tools therein.
I am wondering whether this might be a problem with the ASI294 MM camera because there was no such effect using an ASI 715MC OSC (1.45 um pixel) camera and capturing RAW8 files. Or did I make some error in capture settings (below)?
Images show images of the central peak in Theophilus --- mono8 with the ASI294 MM camera and one (not brilliantly focused) with the ASI 715MC.
Any help or suggestions appreciated
---------------------------------------------------------
[ZWO ASI294MM Pro]
CameraSerialNumber=1D06570E17000900
FrameType=Light
Pan=3492
Tilt=2304
Output Format=SER file (*.ser)
Binning=1
Resolution=1280x1024
Read Mode=46 Megapixel
Colour Space=MONO8
Exposure/Gain Shift=0
High Speed Mode=On
Turbo USB=80(Auto)
Flip=None
Frame Rate Limit=Maximum
Gain=121
Exposure=10.9450ms
Timestamp Frames=Off
Brightness=10
Cooler Power=0
Temperature=15.1
Target Temperature=-5
Cooler=Off
Auto Exp Max Gain=350
Auto Exp Max Exp MS=30000
Auto Exp Target Brightness=100
CA Reduction/Synthetic Blue=Off
Mask over exposed pixels=Off
Flip (after dark/flat)=None
Trail Width=3
Minimum Trail Length=100
Trail Detection Sensitivity=9
Remove Satellite Trails=Off
Background Subtraction=Off
Planet/Disk Stabilization=Off
Banding Threshold=10
Banding Suppression=0
Apply Flat=None
Dark Scaling (Experimental)=Off
Hot Pixel Sensitivity=5
Subtract Dark=None
DisplayStretchEnable=1
NegativeDisplay=0
Display Black Point=0
Display MidTone Point=0.5245353968549946
Display White Point=1
Notes=
Pegasus Astro Focus Controller=72370
Focuser Temperature=9.75
iOptron CEM120,70,40,26, GEM, HEM, HAE, HAZ series and SkyHunter Mount=RA=08:33:32.5,Dec=+22:25:20 (JNOW)
TimeStamp=2025-05-03T21:07:56.1709157Z
SharpCapVersion=4.1.12946.0
StartCapture=2025-05-03T21:07:56.1604761Z
MidCapture=2025-05-03T21:09:11.2845462Z
EndCapture=2025-05-03T21:10:26.4086163Z
JDStartCapture=2460799.380511
JDMidCapture=2460799.381381
JDEndCapture=2460799.382250
Duration=150.248s
FrameCount=3534
ActualFrameRate=23.5211fps
TimeZone=+1.00