Fails to Initialize Camera in ZWO ASI120MM

Anything that doesn't fit into any of the other forums
Post Reply
daniellouis
Posts: 1
Joined: Wed Apr 16, 2025 4:56 am

Fails to Initialize Camera in ZWO ASI120MM

#1

Post by daniellouis »

Hi all,
I've been encountering a persistent and rather puzzling issue with SharpCap (64-bit, v4.1.10158) on my Windows 11 machine while attempting to initialize my ZWO ASI120MM camera. I’m posting here in hopes someone with deeper insight into SharpCap’s camera initialization pipeline or USB handling might be able to assist or point me toward further debugging options.
Symptoms:
Upon clicking "Cameras > ZWO ASI120MM" in the dropdown, SharpCap either:
Completely freezes for 15–20 seconds before throwing a "Camera Failed to Start" error.
Or crashes to desktop without an error window (event viewer shows an application hang in SharpCap.exe).
This behavior is intermittent but leans toward failure 90% of the time. The same camera works flawlessly with ASICap and FireCapture on the same system.
Is there a known issue with ASI120MM on SharpCap in recent builds?
Any advanced logs I can enable (verbose mode?) to trace the failure point?
Would using the DirectShow interface instead of native SDK bypass the issue as a test?
User avatar
admin
Site Admin
Posts: 17583
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Fails to Initialize Camera in ZWO ASI120MM

#2

Post by admin »

Hi,

firstly, you are using quite an old version of SharpCap, so please update to the latest version from https://www.sharpcap.co.uk/sharpcap/downloads - it's possible that any error or bug you are encountering has already been fixed. It's probably also worth installing the latest ZWO camera drivers from https://www.zwoastro.com/software/ - maybe you have an old version of them as well as an old version of SharpCap?

Another thing to do would be to ensure that you have a simple USB connection back to the PC via a single USB cable that is known to be good - remove any extensions, hubs, etc, for this testing as they can cause problems.

If this doesn't help then please post the SharpCap log file here - captured after trying to open the camera - that will record any specific errors that have occurred during the process.

Further troubleshooting steps would include trying to open the camera in other software (for instance ASICap) to see if that works - failure to work in multiple applications would tend to point to a problem at a more fundamental level (hardware, connection, drivers, etc) while failure to work in SharpCap alone may indicate a software bug.

cheers,

Robin
Post Reply