Sensor Analysis problem with asi 183mc Pro

[doseri]

Hi ,,,

i was trying the Sensor Analysis on my new ZWO asi 183mc pro, so i Start the Sensor Analysis procedure but i can not finish it , it takes for ever i do not know what i do ??:

so if anyone can help me on this problem
sam

[admin]

Hi,

at what stage does it get stuck? (What are the messages showing and what exposure /gain are set). One problem is that if the initial light level is too low then some steps can requre very long exposure (several seconds), so the whole procedure can take a long time. Sometimes you have to set the light level so the initial exposure is about 1-2ms to avoid this problem.

Robin

[doseri]

Hi,

at what stage does it get stuck? (What are the messages showing and what exposure /gain are set). One problem is that if the initial light level is too low then some steps can require very long exposure (several seconds), so the whole procedure can take a long time. Sometimes you have to set the light level so the initial exposure is about 1-2ms to avoid this problem.

Robin

Dear Robin

the stage that get stuck in the 3 part ( after uncover for the dark's ) , for the exposure and gain i set the default , can you please demonstrate for me procedure , i am using the new color cool (zwo asi 183mc pro), and what do you Recommend for the camera setting would like to to use the Smart Histogram for image deep sky objects

1-what is the best driver for using with ZWO ???
2- Do i do Debayer for the image ??

Waiting for you support

Best Regards

[admin]

What driver should you use? The one nearest the top of the menu - see https://docs.sharpcap.co.uk/2.9/#Cameras

Should you use debayer for sensor analysis? Yes, so that the code knows which colour pixels are which (on colour cameras it does the analysis on only the green pixels, but needs to know which are the green pixels, so debayer must be set correctly).

Please see this video tutorial for info on using the sensor analysis - viewtopic.php?f=35&t=801 - if you are still stuck then please include a screenshot of where you get stuck.

thanks,

Robin

[doseri]

What driver should you use? The one nearest the top of the menu - see https://docs.sharpcap.co.uk/2.9/#Cameras

Should you use debayer for sensor analysis? Yes, so that the code knows which colour pixels are which (on colour cameras it does the analysis on only the green pixels, but needs to know which are the green pixels, so debayer must be set correctly).

Please see this video tutorial for info on using the sensor analysis - viewtopic.php?f=35&t=801 - if you are still stuck then please include a screenshot of where you get stuck.

thanks,

Robin

Dear Robin

Thank you

to by clear up on the drives, do i use ASCOM driver or DirectShow cameras , for DirectShow camera driver there two one by ZWO

regards
sam

[admin]

Hi Sam,

neither ASCOM or DirectShow - the camera should appear in a 'ZWO ASI Cameras' section near the top of the menu like this

Capture.PNG (19.16 KiB) Viewed 2988 times

If you are not seeing that section the you probably need to update your ZWO driver and/or SharpCap to the very latest version.

thanks,

Robin