QHY Minicam8C
Posted: Sat Mar 08, 2025 9:38 am
Dear Robin,
I just received a QHY MInicam8C and tried to use with SharpCap.
After install and uninstall and reinstall I'm able to use it (QHYCCD_Win_AllInOne.24.12.27.10).
Cooling behavior is strange: power 0 but temperature decrease quickly to 7.5 °C and remain stable.
If I set 0°C it (too) quickly goes to 0°.
If I set 10°C starting from 0°C it do not work at all or sometimes increase slowly 1-2 °C
If I disconnect and reconnect the camera warming goes from 0°C to 5-6 °C. But I set 12 °C and air is 15 °C
Strange behavior
More I found also a new driver (QHYCamerasDriver-V25.01.13.1228-For-Windows10-NewIO) but if installed the camera do not appear anymore in the camera detected.
This is probably due to the (bugged) drivers. I am reporting this for your information
Best Regards
Fabio
I just received a QHY MInicam8C and tried to use with SharpCap.
After install and uninstall and reinstall I'm able to use it (QHYCCD_Win_AllInOne.24.12.27.10).
Cooling behavior is strange: power 0 but temperature decrease quickly to 7.5 °C and remain stable.
If I set 0°C it (too) quickly goes to 0°.
If I set 10°C starting from 0°C it do not work at all or sometimes increase slowly 1-2 °C
If I disconnect and reconnect the camera warming goes from 0°C to 5-6 °C. But I set 12 °C and air is 15 °C
Strange behavior
More I found also a new driver (QHYCamerasDriver-V25.01.13.1228-For-Windows10-NewIO) but if installed the camera do not appear anymore in the camera detected.
This is probably due to the (bugged) drivers. I am reporting this for your information
Best Regards
Fabio