Page 1 of 1
New software tool for collimating with tri-bahtinov mask
Posted: Mon Jun 24, 2024 9:06 am
by Menno555
I just found a new, great tool for collimating with a Tri-Bahtinov mask. The tool is been there since last year, but just discovered it now.
General info, discussion and download location on
https://www.cloudynights.com/topic/8788 ... -software/
It can be used for focusing with a Bahtinov mask and for focusing and/or collimating with a Tri-Bahtinov mask.
It has some very cool features like an assistant too to see which collimating screws have to be adjusted, which way and how much.
I found it very easy to use and noticed that I could use it in the way that worked for me. So it's versatile in use.
And no, this is no advertisement

It's just something I know rather a lot of people were/are looking for.
This is my final result.

- Clipboard_06-24-2024_01.jpg (192 KiB) Viewed 3550 times
Re: New software tool for collimating with tri-bahtinov mask
Posted: Sat Apr 11, 2026 2:30 pm
by Jeddymo51
Just downloaded SkyCal and the instructions. Very anxious to use it once the clouds part. Must use my PC laptop with windows. So I will use Sharpcap to create the star image. Not really familiar with Sharpcap. Is the star image a "live" image?
Re: New software tool for collimating with tri-bahtinov mask
Posted: Sun Apr 12, 2026 7:33 pm
by Menno555
Hello and welcome
The star image is a captured image by SharpCap (or what ever capture program) and that capture is fed into the collimaton program. I presume that this still is the case with the latest version of it. Haven't used it for a while now
Menno
Re: New software tool for collimating with tri-bahtinov mask
Posted: Mon Apr 13, 2026 3:06 am
by Gfischer
I use a tri mask for collimating my 12” dob. I tried the sky cal program it worked well but the problem I found was the numbers calculated kept changing. Probably my seeing conditions. I just use the mask alone. If you orient mask where the edges of each section aligns with the primary screws drawn with an imaginary line up the tube aligned with the optical axis. When adjusting screws the star will move at right angles to the set of line images you are adjusting. Only takes a few tries to get everything centered. I find tri masks better than laser or Cheshire tools.
Re: New software tool for collimating with tri-bahtinov mask
Posted: Mon Apr 13, 2026 12:52 pm
by admin
Hi,
I've used SkyCal now with great success to collimate my classical cassegrain. As noted, the numbers tend to jump around a bit when the seeing isn't steady. When that happens I tend to watch out for the range of variation - if it is wobbling between +0.3 and -0.3 then that is pretty much right, but between +0.5 and -0.1 indicates that more tweaking is required.
Basically you get the star live view working in SharpCap and then SkyCal works by grabbing the image that SharpCap is showing (like doing a screen capture several times per second) and then processing that grabbed image.
cheers,
Robin
Re: New software tool for collimating with tri-bahtinov mask
Posted: Mon Apr 13, 2026 2:34 pm
by kaymann
It is all I use now and it continues to be developed - I saw an update this year. Very accurate I really appreciate this tool!
Re: New software tool for collimating with tri-bahtinov mask
Posted: Wed Apr 15, 2026 10:57 am
by turfpit
Menno
I recently purchased a Tri-Bahtinov mask with the intent of checking the collimation of my Celestron 8" SCT (which is fitted with Bob's Knobs). At first try, the pattern was aligned in 4 directions but slightly out in 2 directions but the image was unstable. Tried another night and same problem with 2 of the directions wobbling between perfect and slightly out. Both times I backed off making any adjustments as I felt I could make things worse. The atmosphere will be better over the coming months.
Thanks for the link to the software it looks like it will be useful.
Dave
Re: New software tool for collimating with tri-bahtinov mask
Posted: Wed Apr 15, 2026 4:19 pm
by Menno555
turfpit wrote: Wed Apr 15, 2026 10:57 am
...
Thanks for the link to the software it looks like it will be useful.
Dave
Hi Dave
I recognise what you describe: here in the city it's almost never perfectly stable. But I got good and more stable views when I did the collimaton with an IR-Pass filter: Near IR tends to have less trouble with air disturbance. The wavelength stays more stable (or however it's called

).
Menno
Re: New software tool for collimating with tri-bahtinov mask
Posted: Wed Apr 15, 2026 5:57 pm
by turfpit
Thanks Menno, I will try the IR filter.
Dave