Hi Robin,
I use your target selection list in the goto tool constantly and really enjoy it. The altitude selector limits the objects by altitude above horizon. I use a dob and there is a section of sky I can’t view because of the mount design. The dreaded dob hole near zenith. How about an addition to altitude selection to limit objects no higher than a certain altitude.(ie objects <80 deg altitude?
Thanks
George
Go to target selecting
Forum rules
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
- admin
- Site Admin
- Posts: 13520
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Go to target selecting
Hi George,
thanks for the suggestion - I hadn't thought of that!
I have plans to improve the minimum altitude at some point so you can specify a variable horizon (different heights in different directions), so I will think about it then.
cheers,
Robin
thanks for the suggestion - I hadn't thought of that!
I have plans to improve the minimum altitude at some point so you can specify a variable horizon (different heights in different directions), so I will think about it then.
cheers,
Robin