Corona Mosaics

Got an idea for something that SharpCap should do? Share it here.
Forum rules
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
Post Reply
kpanik
Posts: 1
Joined: Sat Mar 16, 2024 12:51 pm

Corona Mosaics

#1

Post by kpanik »

Is there any way, or plans to be able to make a mosaic larger than the disk in order to capture the entire corona during an eclipse?

Thanks!
User avatar
admin
Site Admin
Posts: 13347
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Corona Mosaics

#2

Post by admin »

Hi,

there is already an option to add a safety margin around the edge of the disc to ensure that no areas are lost if the alignment is a bit off. This can currently be increased to 500 pixels, which might be enough for your purposes (depending on pixel size/focal length/etc). If you think 500 pixels is a bit small then let me know and I can increase the limit easily.

Note that of course this will image the interior of the disc as well as the edges, which may not be quite perfect. Also, avoid using the auto-exposure option if you try this as it will use a panel near the center of the disc to do the auto-exposure (usually brightest region), but that will end badly during an eclipse!

cheers,

Robin
Post Reply