Electric focuser ZWO
I am using EAF, but I cannot select ZWO EAF because it is NONE in the sharpcap settings hardware foker and hardware selection. How can I select EAF?
ZWO EAF
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
- admin
- Site Admin
- Posts: 13460
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: ZWO EAF
Hi,
if you are seeing nothing to choose except 'None' then you probably need to install the following software
* Ascom Platform version 6.6SP2 - https://ascom-standards.org/Downloads/Index.htm
* ZWO EAF ASCOM Driver - https://www.zwoastro.com/software/
Once both of those are installed (and you have restarted SharpCap), the EAF should show up in the list for you to choose.
cheers,
Robin
if you are seeing nothing to choose except 'None' then you probably need to install the following software
* Ascom Platform version 6.6SP2 - https://ascom-standards.org/Downloads/Index.htm
* ZWO EAF ASCOM Driver - https://www.zwoastro.com/software/
Once both of those are installed (and you have restarted SharpCap), the EAF should show up in the list for you to choose.
cheers,
Robin