Page 1 of 1
New version is great had a problem posted log
Posted: Fri Nov 03, 2023 8:23 pm
by yomamma
I ran three different image sessions in one sequence last night and all were successful.
I had two strange problems that I documented in txt file and included the entire log file.
https://internetsearchtechnologies.com/Nov2Log.7z
Re: New version is great had a problem posted log
Posted: Sat Nov 04, 2023 2:44 pm
by admin
Hi,
thanks for sharing the logs.
I think your analysis of the first issue is basically correct - PHD2 didn't respond for some reason to SharpCap's request to resume guiding. Eventually the request timed out, got retried, timed out again and caused an error in the sequence. That error got swallowed by the 'Ignore Errors' step and the sequence moved on. Unfortunately there is no way to tell from the SharpCap log what might have caused PHD2 to either not respond or respond very slowly. It might be worth looking at the PHD2 log if you have one at that time to see if there is anything interesting.
It looks like the sequence did finish as planned at about 6am - this can be found near the end of the log
Code: Select all
Debug 06:00:51.176332 #1 Sequencer : Completed : Sequence in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Info 06:00:51.411389 #1 The sequence is now finished. in async Task SharpCap.Sequencer.SequencerContext.RunAsync(ScriptBlock script)
I expect what happened is that the 6am deadline happened when in the middle of the focus part of the sequence, so that it ended up cancelling the autofocus procedure while it was active, leaving the focus UI on screen after shutdown. I don't think there is anything to worry about there.
cheers,
Robin