Hi Robin,
Lately, last few weeks, ive noticed coordinate info, top right, stops updating/freezes. It’s happened 2-3 times during last 2 weeks. The only way I’ve found to start it again is to close & reopen program.
If there’s further input u need, let me know.
John
Coordinate info stops updating/ responding
-
john_robertson1953
- Posts: 56
- Joined: Sat Oct 01, 2022 6:02 pm
-
admin
- Site Admin
- Posts: 13350
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Coordinate info stops updating/ responding
Hi John,
if this is the mount co-ordinate readout (RA/Dec, etc) then this can happen if the mount ASCOM driver stops responding to requsts. Sometimes there can be a temporary glitch that is enough to stop this from happening. Please try using SharpCap 4.1 (https://www.sharpcap.co.uk/sharpcap/sha ... p-4-1-beta) as that has better recovery from this sort of situation that ought to recover without you noticing in most situations if the hardware glitch clears.
cheers,
Robin
if this is the mount co-ordinate readout (RA/Dec, etc) then this can happen if the mount ASCOM driver stops responding to requsts. Sometimes there can be a temporary glitch that is enough to stop this from happening. Please try using SharpCap 4.1 (https://www.sharpcap.co.uk/sharpcap/sha ... p-4-1-beta) as that has better recovery from this sort of situation that ought to recover without you noticing in most situations if the hardware glitch clears.
cheers,
Robin