Lagoon (M8)

A place to share images that you have taken with SharpCap.
Forum rules
Please upload large images to photo sharing sites (flickr, etc) rather than trying to upload them as forum attachments.

Please share the equipment used and if possible camera settings to help others.
Post Reply
kaymann
Posts: 112
Joined: Thu Jun 16, 2022 2:59 pm
Location: https://azkayfes.blogspot.com/

Lagoon (M8)

#1

Post by kaymann »

Celestron C9.25 - HyperStar (Tilt Adjusted and Culminated) f/2.2 (525mm)
ZWO ASI533MC Pro - Brightness (Offset) 10, Gain 105 (Unity 100), Cooled to 0°C
Askar 50mm Guide Scope - ZWO ASI290mm Mini
PHD2 - 3 Second (New Dark Library) & Recent Calibration
SC - (ASTAP - Plate solve, Center, & Sync), Live Stack, Save All, Master Bias Flat = Yes, Master Dark = Yes
ASTAP - Preprocess Stack Analyze 40% Reject Rate, Stack to Master FITS
Siril - Background Extraction, Photometric Color Calibration, Green Noise Removal, StarNet Starless Master and Star Mask, Asinh & Histogram Stretch on Starless, Starless Saturation, StarNet Star Recomposition (Star Negative Stretch),
Darktable - Copyright and minor contrast, export PNG

2023-06-16
Smaller20230617-142126-M8 NGC6523 Siril-DT-Starless-Star.jpg
Smaller20230617-142126-M8 NGC6523 Siril-DT-Starless-Star.jpg (199.34 KiB) Viewed 6020 times
User avatar
Menno555
Posts: 1060
Joined: Mon Apr 20, 2020 2:19 pm
Location: The Netherlands
Contact:

Re: Lagoon (M8)

#2

Post by Menno555 »

Very nice, I always like the center of this object.
One tip? The background is very dark here. I checked in Photoshop and it almost black with 1-1-1 (those are the RGB values).
I don't know Darktable but if you can see color numbers there (those numbers from 0 to 255), try to get the background somewhere in between 20 and 30. This will make it easier to look at and is more "natural" since it's never pitch black up there :)

Menno
kaymann
Posts: 112
Joined: Thu Jun 16, 2022 2:59 pm
Location: https://azkayfes.blogspot.com/

Re: Lagoon (M8)

#3

Post by kaymann »

Thank you, I will try to remember that and my settings for Siril background extraction or histogram stretching may be the culprit. As there is so little non-nebula to select. I will work on that! I will also check my PNG as I compressed it down to kilobytes.

Thanks again!

Randall
Post Reply