Hi Robin,
I use SharpCap with my ASI 294MC Pro and a Samyang f = 135 mm.
This gives a pixel size of 7.4 arcseconds and a Bayer matrix
of 14.8 x 14.8 arcseconds.
The camera is connected to my laptop via the SynScanPro App.
My SharpCap 4.0 uses the ASCOM SynScan App Driver.
I have tried to use dither (no guiding) with ASCOM Mount Puls
Guiding. This works, but the Max Dither Step is constrained
to 30 arcseconds in live addition. So the mean dither step is
around 15 arcseconds (two pixel or one Bayer).
Is it possible to enlarge the Max Dither Step?
Regards,
Rainer
Max Dither Step
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
- admin
- Site Admin
- Posts: 13296
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Max Dither Step
Hi,
yes, that's easy to change - will 60 be sufficient?
cheers,
Robin
yes, that's easy to change - will 60 be sufficient?
cheers,
Robin
-
- Posts: 3
- Joined: Wed Aug 17, 2022 9:58 pm
Re: Max Dither Step
I would like 90!
cheers,
Rainer
cheers,
Rainer
- admin
- Site Admin
- Posts: 13296
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Max Dither Step
Let's go for 100. A nice round number, and only one extra keypress
cheers,
Robin
cheers,
Robin
-
- Posts: 3
- Joined: Wed Aug 17, 2022 9:58 pm
Re: Max Dither Step
Thanks, 100 is good for my setup.
Cheers,
Rainer
Cheers,
Rainer