power switch
Forum rules
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
power switch
Are there any plans to support wanderbox or pegasus power boxes?
- admin
- Site Admin
- Posts: 13287
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: power switch
Hi,
not straight away, but I have had a couple of other requests to support ASCOM switches, so every request helps give the feature a bit more priority.
thanks,
Robin
not straight away, but I have had a couple of other requests to support ASCOM switches, so every request helps give the feature a bit more priority.
thanks,
Robin
Re: power switch
Another request for Pegasus support. My dew heaters are controlled by Pegasus so it would be great to start, set the output, and shut the power off as part of my sequence.
- admin
- Site Admin
- Posts: 13287
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: power switch
Hi,
actually this one is done now in SharpCap 4.1 - there is support for ASCOM switches (it's right at the bottom of the hardware settings, under the rotator section). I have the Pegasus box and it seems to work fine. Should work OK with the Wanderer too as long as their ASCOM driver is installed.
cheers,
Robin
actually this one is done now in SharpCap 4.1 - there is support for ASCOM switches (it's right at the bottom of the hardware settings, under the rotator section). I have the Pegasus box and it seems to work fine. Should work OK with the Wanderer too as long as their ASCOM driver is installed.
cheers,
Robin