QHY 128C

Post Reply
kts12in1
Posts: 6
Joined: Thu Jun 09, 2022 5:50 pm

QHY 128C

#1

Post by kts12in1 »

Hello Robin,
Said goodbye to Maxim, hello to Sharp cap pro.
Downloaded all the software , Ascom 6.5 + 6.6, and Allin-one- from QHYCCD.
My 600 M opens in Sharp cap so does the 268 C.
Oddly enough: 128 C does not show up in the camera list.
Message: system driver 18-4-25 needs update to system driver 21-9-9 .....Hhm, I am stuck.
Strange, I think ,because two QHY cameras are doing just fine.
Love Phd2 + Sharpcap !!
Regards, William.
User avatar
admin
Site Admin
Posts: 13177
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: QHY 128C

#2

Post by admin »

Hi William,

good to hear that you are enjoying SharpCap Pro.

The 128C should work if you can get a recent QHY driver installed - the system driver is usually the very first entry in the long list of things that you can tick/untick when installing the QHY all-in-one, so make sure that item is ticked. You could also try the 'beta' all-in-one from their download page as that is newer (May 2022).

cheers,

Robin
kts12in1
Posts: 6
Joined: Thu Jun 09, 2022 5:50 pm

Re: QHY 128C

#3

Post by kts12in1 »

Hello Robin,
Thanks for the advice. Never to old to learn.
The all-in-one package can be a little intimidating, I must say.
Yesterday I gave it another try and guess what,
same message regarding the system driver, BUT..... the 128C was open for business !!
Strange things do happen with electronics !
Now my learning curve is in full swing.
Regards, William.
Post Reply