Page 1 of 1

Question about built in wedges on ALT-AZ mounts

Posted: Sat Jun 25, 2022 4:03 pm
by Buckrogers
Hey Guys,

I have a Nexstar 4se with builtin wedge. Will this work with sharp cap polar alignment because I don't have any adjusting knobs, just the latitude scale which I set to my latitude. So my process would be:

CPWI Star Sense Auto align with Wedge enabled (OTA point south, fork pointing north)
Go through the sharpcap polar alignment and hope it works :)

Re: Question about built in wedges on ALT-AZ mounts

Posted: Sat Jun 25, 2022 8:21 pm
by turfpit
Buck

See the 4SE manual pages 32/33 for some instructions. You are looking for EQ Align North (or South) in the Nexstar handset.

Dave

Re: Question about built in wedges on ALT-AZ mounts

Posted: Sun Jun 26, 2022 12:55 pm
by admin
Hi,

difficult to find any close up pictures of that tripod/wedge online, so not 100% sure. In theory you can polar align using SharpCap by moving the latitude adjustment and twisting the whole tripod when you need to go east/west, but it's going to be pretty difficult to get good results just due to the crude nature of the adjustments.

cheers,

Robin

Re: Question about built in wedges on ALT-AZ mounts

Posted: Sun Jun 26, 2022 1:04 pm
by Buckrogers
Hi,

Kind of figured that, guess I'll use ASPA or go through the HC for Star Sense. Thanks for checking.

Re: Question about built in wedges on ALT-AZ mounts

Posted: Sun Jun 26, 2022 2:28 pm
by turfpit
I have found ASPA (All Star Polar Align) is worth doing. I always use it with my AVX equatorial mount.

Dave