Page 1 of 1
ZWO ASI533MM-Pro Sensor Analysis
Posted: Fri Jun 10, 2022 3:43 pm
by roelb
I attached the SC Sensor Analysis results for the new ZWO ASI533
MM-Pro.
- SC Sensor Analysis ZWO ASI533MM-Pro
- SC Sensor Analysis.jpg (377.99 KiB) Viewed 1961 times
Re: ZWO ASI533MM-Pro Sensor Analysis
Posted: Sat Jun 11, 2022 12:56 pm
by admin
Hi,
yep, that looks good - pretty much what I would expect based on analysis data I've seen for other cameras based on the 533 from different brands. I'd be starting off at 100 gain with that camera
cheers,
Robin
Re: ZWO ASI533MM-Pro Sensor Analysis
Posted: Fri Jun 24, 2022 10:38 pm
by marter
The analysis for my ASI533mm pro is very similar. What offset would you recommend? I've done Dale Ghent's process to see what offset is necessary to keep the histogram off the left edge but I'm curious what you recommend, Robin.
Thanks in advance.
Re: ZWO ASI533MM-Pro Sensor Analysis
Posted: Sat Jun 25, 2022 12:23 pm
by admin
Hi,
the answer depends on the gain you choose, since higher gains spread out the dark histogram peak more, meaning a higher offset is needed. It's therefore impossible to give a single answer to this. Using the Smart Histogram 'Brain' functionality will work this out for you.
cheers,
Robin
Re: ZWO ASI533MM-Pro Sensor Analysis
Posted: Sat Jun 25, 2022 1:25 pm
by marter
Thanks, Robin. I kind of expected that answer. I was surprised at the ZWO presets that are included in the firmware which all have an offset of 70 suggested. Didn't make sense to me that they would do that.